Hi, 'Nautidog' has a bulkhead mounted fuel & water filter that has the appearance of an oil filter. Harbor Freight has oil cap wrenches in metric sizes. Also, strap wrenches - which can be used in other areas that you may not wish to apply a regular tool (channel locks, vise grips, etc.)
Earl, #3118 ________________________________ From: Port Huron Freecycle <[EMAIL PROTECTED]> To: [email protected] Sent: Saturday, November 22, 2008 3:25:21 PM Subject: Re: catalina27-talk: Tool reccomendations If you have an inboard engine with an oil filter. My Atomic 4 does not have am oil Filter. Steve Bayless #3491 "Liebchen" Port Huron, MI On Sat, Nov 22, 2008 at 1:22 PM, Ralph E. Ahseln <[EMAIL PROTECTED]> wrote: Derek, Welcome to the C27 group! If you have an Inboard engine.. Include an Oil Filter Wrench .. I'd recommend an END CAP type. Also.. for the water pump impellor.........A correctly sized "C" clip pliers... Regards, Ralph Ahseln 'Oblio' Gresham OR ----- Original Message ----- From: "Derek Atkin" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, November 22, 2008 7:15 AM Subject: catalina27-talk: Tool reccomendations I have recently just purchased a 1979 Catalina 27. As I am putting together my list of things to buy - was curious to hear any special tool reccomendations. I assume just about everything on the boat is SAE. Aside from sockets, wrenches, screwdrives etc. Anything that I should keep on board ? Thanks Derek A. -- http://groups.yahoo.com/group/porthuronfreecycle/
