Correction: In point-to-multipoint the next hop is the HUB, my mistake. So with that being said what I said originally does make sense. For a spoke to reach another spoke, it has to go through the hub, which counts as a hop. With non-broadcast / broadcast the next hop will be the spoke itself.
On Wed, Aug 12, 2009 at 7:14 PM, Joe Astorino <[email protected]>wrote: > The reason is likely to do with the way the next-hop is done with OSPF > point-to-multipoint. In point-to-multipoint the next-hop gets set to the > spoke router that originated the route...so technically it is more than 1 > hop away and that is why it works with ebgp multihop > > > On Wed, Aug 12, 2009 at 6:35 PM, Terry Vinson > <[email protected]>wrote: > >> Hey guys, >> >> Hope someone can shed some light on this one. Has anyone ever had any >> issues building eBGP neighbors across an OSPF point-to-multipoint >> configured Frame Relay. I think the /32 host routes are causing me >> issues. If I change the "network type" I get neighbors to form, or if I >> use the ebgp-multihop. >> >> Thanks in advance for the help. >> >> Terry >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> > > > > -- > Regards, > > Joe Astorino - CCIE #24347 R&S > Technical Instructor - IPexpert, Inc. > Cell: +1.586.212.6107 > Fax: +1.810.454.0130 > Mailto: [email protected] > -- Regards, Joe Astorino - CCIE #24347 R&S Technical Instructor - IPexpert, Inc. Cell: +1.586.212.6107 Fax: +1.810.454.0130 Mailto: [email protected]
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
