Thats great! When you get to MPLS VPNs, 2 interfaces with the same IP is OK!!
On Aug 12, 2009, at 8:36 PM, Terry Vinson wrote: > @All - found the issue, after a reload my debug changed to OpenSent. > > @Joe - I had two interfaces with the same ip address on the router > and > a switch loopback. Trace route went the wrong way (to the loopback > which had a /32 mask). > > Crisis over I'm not insane just stupid. Wooties! > > Thanks, > Terry > > > Joe Astorino wrote: >> Do a traceroute...you will see it bounce through the HUB and thus you >> need ebgp multihop :) >> >> On Wed, Aug 12, 2009 at 7:35 PM, Terry Vinson >> <[email protected] <mailto:[email protected]>> wrote: >> >> @Adrian - Thanks for the reply. I'm not using Lo's. When I fire up >> debug >> I just get "time expired" messages. >> >> @Joe - I'm going to erase the configs and reload, and see what >> happens >> when I reconfig. I'm wondering if I've just been beating on the >> router >> for to long. >> >> @All - Thanks a bunch. I'll let you know what happens. >> >> Terry >> >> Adrian Brayton wrote: >>> Hey Terry, >>> Are you trying to form peers with a loopback interface? If so, thats >>> why your ebgp multi-hop command is fixing the issue as a >> loop-back is >>> considered a second hop. And with your /32, OSPF considers this a >>> loopback network type and when you change it to point-to-point (I am >>> just trying to remember) it starts working. >>> >>> Also, when you are having issue's like you are having, fire up the >>> debug on the router... That will usually get you headed in the right >>> direction on what to search for on google! >>> >>> HTHs >>> >>> >>> >>> On Aug 12, 2009, at 6:35 PM, Terry Vinson wrote: >>> >>>> Hey guys, >>>> >>>> Hope someone can shed some light on this one. Has anyone ever >> had any >>>> issues building eBGP neighbors across an OSPF point-to-multipoint >>>> configured Frame Relay. I think the /32 host routes are causing me >>>> issues. If I change the "network type" I get neighbors to form, >> or if I >>>> use the ebgp-multihop. >>>> >>>> Thanks in advance for the help. >>>> >>>> Terry >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com <http://www.ipexpert.com> >>> >>> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, >> please visit www.ipexpert.com <http://www.ipexpert.com> >> >> >> >> >> -- >> Regards, >> >> Joe Astorino - CCIE #24347 R&S >> Technical Instructor - IPexpert, Inc. >> Cell: +1.586.212.6107 >> Fax: +1.810.454.0130 >> Mailto: [email protected] <mailto:[email protected]> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
