@All - found the issue, after a reload my debug changed to OpenSent. @Joe - I had two interfaces with the same ip address on the router and a switch loopback. Trace route went the wrong way (to the loopback which had a /32 mask).
Crisis over I'm not insane just stupid. Wooties! Thanks, Terry Joe Astorino wrote: > Do a traceroute...you will see it bounce through the HUB and thus you > need ebgp multihop :) > > On Wed, Aug 12, 2009 at 7:35 PM, Terry Vinson > <[email protected] <mailto:[email protected]>> wrote: > > @Adrian - Thanks for the reply. I'm not using Lo's. When I fire up > debug > I just get "time expired" messages. > > @Joe - I'm going to erase the configs and reload, and see what happens > when I reconfig. I'm wondering if I've just been beating on the router > for to long. > > @All - Thanks a bunch. I'll let you know what happens. > > Terry > > Adrian Brayton wrote: > > Hey Terry, > > Are you trying to form peers with a loopback interface? If so, thats > > why your ebgp multi-hop command is fixing the issue as a > loop-back is > > considered a second hop. And with your /32, OSPF considers this a > > loopback network type and when you change it to point-to-point (I am > > just trying to remember) it starts working. > > > > Also, when you are having issue's like you are having, fire up the > > debug on the router... That will usually get you headed in the right > > direction on what to search for on google! > > > > HTHs > > > > > > > > On Aug 12, 2009, at 6:35 PM, Terry Vinson wrote: > > > >> Hey guys, > >> > >> Hope someone can shed some light on this one. Has anyone ever > had any > >> issues building eBGP neighbors across an OSPF point-to-multipoint > >> configured Frame Relay. I think the /32 host routes are causing me > >> issues. If I change the "network type" I get neighbors to form, > or if I > >> use the ebgp-multihop. > >> > >> Thanks in advance for the help. > >> > >> Terry > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > >> please visit www.ipexpert.com <http://www.ipexpert.com> > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com <http://www.ipexpert.com> > > > > > -- > Regards, > > Joe Astorino - CCIE #24347 R&S > Technical Instructor - IPexpert, Inc. > Cell: +1.586.212.6107 > Fax: +1.810.454.0130 > Mailto: [email protected] <mailto:[email protected]> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
