Thanks Steve, that did it!
________________________________ From: "Di Bias, Steve" <[email protected]> To: Winston Lee <[email protected]>; "[email protected]" <[email protected]> Sent: Wed, September 8, 2010 4:38:37 PM Subject: RE: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2 You will need to enable it globally using dot1x system-auth-control and then you will need to make you ports static access fa1/0/6 switchport mode access Now you should be OK Don't forget to use the aaa login authentication default none so you don't lock yourself out :) HTH Thank you, Steve Di Bias Network Engineer - Information Systems Valley Health System – Las Vegas Office - 702- 369-7594 Cell - 702-241-1801 [email protected] -----Original Message----- From: ccie_rs [email protected] [mailto: ccie_rs [email protected] ] On Behalf Of Winston Lee Sent: Wednesday, September 08, 2010 2:33 PM To: ccie_rs @onlinestudylist.com Subject: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2 Section 2.10 and 2.11 I am trying to perform section 2.10 and 2.11 to enable dot1x on port fa0/6 and fa0/18. I'm using a 3750 as my switch, with c3750-ipservicesk9-mz.122-55.SE.bin running. I have the following dot1x configuration in place: aaa new-model aaa authentication dot1x default none aaa session-id common When I attempt to enable dot1x on the interface level, it doesn't give me the option to do it. Can anyone tell me what I'm missing here? Cat3560-2(config)#int fa1/0/6 Cat3560-2(config-if)#d? dampening default delay description down-when-looped duplex Cat3560-2(config-if)#dot1x port-control auto ^ % Invalid input detected at '^' marker. Cat3560-2#sh run int fa1/0/6 Building configuration... Current configuration : 85 bytes ! interface FastEthernet1/0/6 description R6 Fa0/0 switchport access vlan 567 end _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com UHS Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution of this information is prohibited, and may be punishable by law. If this was sent to you in error, please notify the sender by reply e-mail and destroy all copies of the original message.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
