You will need to enable it globally using
dot1x system-auth-control
and then you will need to make you ports static access
fa1/0/6
switchport mode access
Now you should be OK
Don't forget to use the aaa login authentication default none so you don't lock
yourself out :)
HTH
Thank you,
Steve Di Bias
Network Engineer - Information Systems
Valley Health System - Las Vegas
Office - 702- 369-7594
Cell - 702-241-1801
[email protected]
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Winston Lee
Sent: Wednesday, September 08, 2010 2:33 PM
To: [email protected]
Subject: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2
Section 2.10 and 2.11
I am trying to perform section 2.10 and 2.11 to enable dot1x on port fa0/6 and
fa0/18. I'm using a 3750 as my switch, with c3750-ipservicesk9-mz.122-55.SE.bin
running.
I have the following dot1x configuration in place:
aaa new-model
aaa authentication dot1x default none
aaa session-id common
When I attempt to enable dot1x on the interface level, it doesn't give me the
option to do it. Can anyone tell me what I'm missing here?
Cat3560-2(config)#int fa1/0/6
Cat3560-2(config-if)#d?
dampening default delay description
down-when-looped duplex
Cat3560-2(config-if)#dot1x port-control auto
^
% Invalid input detected at '^' marker.
Cat3560-2#sh run int fa1/0/6
Building configuration...
Current configuration : 85 bytes
!
interface FastEthernet1/0/6
description R6 Fa0/0
switchport access vlan 567
end
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
UHS Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient (s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution of this information is prohibited. If this was sent to you in
error, please notify the sender by reply e-mail and destroy all copies of the
original message._______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
