Section 2.10 and 2.11
I am trying to perform section 2.10 and 2.11 to enable dot1x on port fa0/6 and
fa0/18. I'm using a 3750 as my switch, with c3750-ipservicesk9-mz.122-55.SE.bin
running.
I have the following dot1x configuration in place:
aaa new-model
aaa authentication dot1x default none
aaa session-id common
When I attempt to enable dot1x on the interface level, it doesn't give me the
option to do it. Can anyone tell me what I'm missing here?
Cat3560-2(config)#int fa1/0/6
Cat3560-2(config-if)#d?
dampening default delay description
down-when-looped duplex
Cat3560-2(config-if)#dot1x port-control auto
^
% Invalid input detected at '^' marker.
Cat3560-2#sh run int fa1/0/6
Building configuration...
Current configuration : 85 bytes
!
interface FastEthernet1/0/6
description R6 Fa0/0
switchport access vlan 567
end
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
