Thanks Jason, but it's still giving me issues, do i need to reboot?
Cat3560-2(config)#dot1x sys
Cat3560-2(config)#dot1x system-auth-control
Cat3560-2(config)#int fas1/0/6
Cat3560-2(config-if)#d?
dampening default delay description
down-when-looped duplex
Cat3560-2(config-if)#dot1x port-control auto
^
% Invalid input detected at '^' marker.
----- Original Message ----
From: Jason Maynard <[email protected]>
To: Winston Lee <[email protected]>; [email protected]
Sent: Wed, September 8, 2010 4:35:58 PM
Subject: RE: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2
You need to enable it first
Global config - dot1x system-auth-control
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Winston Lee
Sent: September-08-10 5:33 PM
To: [email protected]
Subject: [OSL | CCIE_RS] BLS 4.0 Vol 1 Lab 2
Section 2.10 and 2.11
I am trying to perform section 2.10 and 2.11 to enable dot1x on port fa0/6
and
fa0/18. I'm using a 3750 as my switch, with
c3750-ipservicesk9-mz.122-55.SE.bin
running.
I have the following dot1x configuration in place:
aaa new-model
aaa authentication dot1x default none
aaa session-id common
When I attempt to enable dot1x on the interface level, it doesn't give me
the
option to do it. Can anyone tell me what I'm missing here?
Cat3560-2(config)#int fa1/0/6
Cat3560-2(config-if)#d?
dampening default delay description
down-when-looped duplex
Cat3560-2(config-if)#dot1x port-control auto
^
% Invalid input detected at '^' marker.
Cat3560-2#sh run int fa1/0/6
Building configuration...
Current configuration : 85 bytes
!
interface FastEthernet1/0/6
description R6 Fa0/0
switchport access vlan 567
end
_______________________________________________
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
