Could you please paste the config here....
i would try to find the issue...
From: [email protected]
To: [email protected]; [email protected]
Date: Wed, 5 May 2010 17:11:03 +1000
Subject: RE: [OSL | CCIE_Security] Yusuf Lab 2
Thanks Sumit – I have tried all these things thanks. Any other ideas?
From: Sumit Mahla [mailto:[email protected]]
Sent: Wednesday, May 05, 2010 5:09 PM
To: Michael Davis; [email protected]
Subject: RE: [OSL | CCIE_Security] Yusuf Lab 2
Michael,
Please check the nhs defined in spokes... it should be Tunnel ip not the NBMA
IP... and nhrp mapping.... be carefull in the mapping... it can escape your
eyes very easily
and also check the network advertised in the routing protocol... only advertise
the tunnel ip network and the loopback network
From: [email protected]
To: [email protected]
Date: Wed, 5 May 2010 16:27:54 +1000
Subject: [OSL | CCIE_Security] Yusuf Lab 2
Hi Everyone – I have got the DMVPN going on Yusuf lab 2. The tunnels work, but
both R3 and R5 are losing the DMVPN adjacencies, then they come straight up
again:
*May 5 06:24:49.271: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 2: Neighbor 172.16.1.1
(Tunnel0) is down: retry limit exceeded
*May 5 06:24:52.451: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 2: Neighbor 172.16.1.1
(Tunnel0) is up: new adjacency
Does anyone know what would cause this?
Thanks
Michael
Invest your money wisely post Budget Sign up now.
_________________________________________________________________
Climate, controversies and the changing signatures of nature
http://green.in.msn.com/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
