Yes, I would do a sub-interface in that case. Regards,
Brandon Carroll - CCIE #23837 Senior Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com On May 5, 2010, at 12:55 AM, Sumit Mahla wrote: > I already have a frame-relay config on R2 S0/1/0 which is connected to R6... > > > I cann't do that... > > Probabaly i can make sub interface of s0/1/0... and then do it ? > > > > Subject: Re: [OSL | CCIE_Security] Yusuf Lab 2 > From: [email protected] > Date: Wed, 5 May 2010 00:48:51 -0700 > CC: [email protected] > To: [email protected] > > Sumit, > > Move that configuration to s0/1/0 on R2 and that will get you to the frame > cloud. HTH > > Regards, > > Brandon Carroll - CCIE #23837 > Senior Technical Instructor - IPexpert > Mailto: [email protected] > Telephone: +1.810.326.1444 > Live Assistance, Please visit: www.ipexpert.com/chat > eFax: +1.810.454.0130 > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE > (R&S, Voice, Security & Service Provider) certification(s) with training > locations throughout the United States, Europe, South Asia and Australia. Be > sure to visit our online communities at www.ipexpert.com/communities and our > public website at www.ipexpert.com > > > > On May 5, 2010, at 12:42 AM, Sumit Mahla wrote: > > > Hell Brandon, > > > I facing an issue regarding frame-relay interface... i am on Proctor labs > rack... > > If you have a topology diagram please help me out... > > > one of my frame relay interface is down... probably due to my config > mistake.... > > > > I see that R2 S0/2/0 is directly connected to R5 S0/2/0 as a point-to-point > serial link... as per the topology diagram... > > I know when the above two mentioned interface are directly connected then the > bewlo config is entirely wrong... i configured this before having a look at > the topology diagram... i thought R2 S0/2/0 is a part of frame relay.... > > I need R2 interface S0/2/0 connectivity to R4 interface S0/0/0 > > I configured R2 S0/2/0 as given below > > > interface Serial0/2/0 > ip address 47.47.23.2 255.255.255.0 > encapsulation frame-relay > ip ospf network broadcast > frame-relay map ip 47.47.23.3 224 broadcast > no frame-relay inverse-arp > ! > > > But the interface is down.... i think i have some doubt regarding layer two > topology of IP Expert... i need to clarify these... > > > > > > Could you please help ? > > > R4 S0/0/0 is UP.... > > > > > > i simply need connectivity of two interfaces... R2 S0/2/0 and R4 S0/0/0... > Could you please suggest... > > > The battle for the FIH Hockey World Cup Drag n' drop > > > The latest auto launches and test drives Drag n' drop
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
