I already have a frame-relay config on R2 S0/1/0 which is connected to R6...
I cann't do that...
Probabaly i can make sub interface of s0/1/0... and then do it ?
Subject: Re: [OSL | CCIE_Security] Yusuf Lab 2
From: [email protected]
Date: Wed, 5 May 2010 00:48:51 -0700
CC: [email protected]
To: [email protected]
Sumit,
Move that configuration to s0/1/0 on R2 and that will get you to the frame
cloud. HTH
Regards,
Brandon Carroll - CCIE #23837
Senior Technical Instructor - IPexpert
Mailto: [email protected]
Telephone: +1.810.326.1444
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130
IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio
Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S,
Voice, Security & Service Provider) certification(s) with training locations
throughout the United States, Europe, South Asia and Australia. Be sure to
visit our online communities at www.ipexpert.com/communities and our public
website at www.ipexpert.com
On May 5, 2010, at 12:42 AM, Sumit Mahla wrote:
Hell Brandon,
I facing an issue regarding frame-relay interface... i am on Proctor labs
rack...
If you have a topology diagram please help me out...
one of my frame relay interface is down... probably due to my config mistake....
I see that R2 S0/2/0 is directly connected to R5 S0/2/0 as a point-to-point
serial link... as per the topology diagram...
I know when the above two mentioned interface are directly connected then the
bewlo config is entirely wrong... i configured this before having a look at the
topology diagram... i thought R2 S0/2/0 is a part of frame relay....
I need R2 interface S0/2/0 connectivity to R4 interface S0/0/0
I configured R2 S0/2/0 as given below
interface Serial0/2/0
ip address 47.47.23.2 255.255.255.0
encapsulation frame-relay
ip ospf network broadcast
frame-relay map ip 47.47.23.3 224 broadcast
no frame-relay inverse-arp
!
But the interface is down.... i think i have some doubt regarding layer two
topology of IP Expert... i need to clarify these...
Could you please help ?
R4 S0/0/0 is UP....
i simply need connectivity of two interfaces... R2 S0/2/0 and R4 S0/0/0...
Could you please suggest...
The battle for the FIH Hockey World Cup Drag n' drop
_________________________________________________________________
South Cinema This Decade
http://entertainment.in.msn.com/southcinemathisdecade/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
