Hell Brandon,
I facing an issue regarding frame-relay interface... i am on Proctor labs
rack...
If you have a topology diagram please help me out...
one of my frame relay interface is down... probably due to my config mistake....
I see that R2 S0/2/0 is directly connected to R5 S0/2/0 as a point-to-point
serial link... as per the topology diagram...
I know when the above two mentioned interface are directly connected then the
bewlo config is entirely wrong... i configured this before having a look at the
topology diagram... i thought R2 S0/2/0 is a part of frame relay....
I need R2 interface S0/2/0 connectivity to R4 interface S0/0/0
I configured R2 S0/2/0 as given below
interface Serial0/2/0
ip address 47.47.23.2 255.255.255.0
encapsulation frame-relay
ip ospf network broadcast
frame-relay map ip 47.47.23.3 224 broadcast
no frame-relay inverse-arp
!
But the interface is down.... i think i have some doubt regarding layer two
topology of IP Expert... i need to clarify these...
Could you please help ?
R4 S0/0/0 is UP....
i simply need connectivity of two interfaces... R2 S0/2/0 and R4 S0/0/0...
Could you please suggest...
_________________________________________________________________
Bollywood This Decade
http://entertainment.in.msn.com/bollywoodthisdecade/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
