I have a working GNS3 environment with IPS and ASA's that replicate pretty much the IPExpert labs. If your IPS and ASA are up and running and you have some access it sounds like you have the right files/software.
I am also running windows and I have two VM's that I use, one for the server and one as a client to keep everything contained in the virtual environment. Which works pretty well for the most part... I found out that if I wanted to access the IPS from outside my GNS3 lab I had to add a "ethernet switch" and then add an interface from one of my routers. I would then configure an IP address on the routers interface that was in my home network, put the IPS management interface on the same subnet and then voila I could connect to the IPS sensor over SSH or IDM just fine. Just make sure that the default gateway for the IPS is the IP address you configured on the router. Otherwise if I have everything set up correct in the GNS3 lab I can connect just fine with my server or client VM's. Thank you, James On Sat, Aug 25, 2012 at 9:03 AM, Brian Clarke <[email protected]>wrote: > If you have a running virtual environment that supports IPS/ASA. I can > use some suggestions, maybe even some files from you. > > I've been compiling all sorts of code on my mac for a few days and the > IPS while I can practice commands but I can't get it communicating outside > it's own network outside of the telnet through the loopback address. > > *Respectfully*, > *Brian Clarke** * > CISSP|CEH|CCNP R/S, Security|CCDA > Sr. Security Engineer - Ethical Hacker > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > *n-**tieractive incorporated** ** * > *c*. 4242252753 > *f*. 8776839531 > *e*. [email protected] > www.n-tieractive.com > *Bridging business with technology.***** > > > * * * PROPRIETARY & CONFIDENTIAL * * * The information contained within > this e-mail and any attached document(s) is confidential and/or > proprietary. It is intended solely for the use of the addressee(s) named > above. Unauthorized disclosure, photocopying, distribution or use of the > information contained herein is prohibited. If you believe that you have > received this e-mail in error, please notify me by reply transmission and > delete the message without copying or disclosing it. > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
