Do you have a modified version of code for IPS and ASA?
Best Regards. ______________________ Adil On Aug 25, 2012, at 5:16 PM, James Keddington II wrote: > I have a working GNS3 environment with IPS and ASA's that replicate pretty > much the IPExpert labs. If your IPS and ASA are up and running and you have > some access it sounds like you have the right files/software. > > I am also running windows and I have two VM's that I use, one for the server > and one as a client to keep everything contained in the virtual environment. > Which works pretty well for the most part... > > I found out that if I wanted to access the IPS from outside my GNS3 lab I had > to add a "ethernet switch" and then add an interface from one of my routers. > I would then configure an IP address on the routers interface that was in my > home network, put the IPS management interface on the same subnet and then > voila I could connect to the IPS sensor over SSH or IDM just fine. Just make > sure that the default gateway for the IPS is the IP address you configured on > the router. > > Otherwise if I have everything set up correct in the GNS3 lab I can connect > just fine with my server or client VM's. > > Thank you, > James > > On Sat, Aug 25, 2012 at 9:03 AM, Brian Clarke <[email protected]> > wrote: > If you have a running virtual environment that supports IPS/ASA. I can use > some suggestions, maybe even some files from you. > > I've been compiling all sorts of code on my mac for a few days and the IPS > while I can practice commands but I can't get it communicating outside it's > own network outside of the telnet through the loopback address. > > > Respectfully, > Brian Clarke > CISSP|CEH|CCNP R/S, Security|CCDA > Sr. Security Engineer - Ethical Hacker > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > n-tieractive incorporated > c. 4242252753 > f. 8776839531 > e. [email protected] > www.n-tieractive.com > Bridging business with technology. > > > > * * * PROPRIETARY & CONFIDENTIAL * * * The information contained within this > e-mail and any attached document(s) is confidential and/or proprietary. It is > intended solely for the use of the addressee(s) named above. Unauthorized > disclosure, photocopying, distribution or use of the information contained > herein is prohibited. If you believe that you have received this e-mail in > error, please notify me by reply transmission and delete the message without > copying or disclosing it. > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
