I would not worry about logging and monitoring commands, I left ip
inspect log drop in there myself. As for ip mtu etc, those are changing
things. General rule is if not asked for, don't configure it. I
understand they are in DMVPN tunnel examples on DocCD, put them in there
if your solutin does not work without them or if there are explicit
requirements for it.
HTH
A.
A.
On 9/7/2012 8:32 AM, Radim Jurica wrote:
Hi guys,
one question about lets say (unwanted?) fine tuning of the final
configurations in the real lab.
Will I loose my points if I left there in configs commands not
required in the task like "ip inspect log drop-pk", ACE "250 deny ip
any any log" or aliases? Or if I configure as a best practice e.g.
"ip mtu" and "ip tcp adjust-mss" on DMVPN/Tunnel interface but the
task don't need it explicitly?
And small another one:) may I use earplugs in the lab?
Thanks a lot!
R.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
