And what about that AAA Auth NONE for line con0 which is configured in almost every workbook config (if there is some aaa configuration) ?
Thanks for thoughts! R. On Fri, Sep 7, 2012 at 12:43 AM, Alexei Monastyrnyi <[email protected]>wrote: > I would not worry about logging and monitoring commands, I left ip > inspect log drop in there myself. As for ip mtu etc, those are changing > things. General rule is if not asked for, don't configure it. I > understand they are in DMVPN tunnel examples on DocCD, put them in there if > your solutin does not work without them or if there are explicit > requirements for it. > > HTH > A. > > A. > > > On 9/7/2012 8:32 AM, Radim Jurica wrote: > > Hi guys, > one question about lets say (unwanted?) fine tuning of the final > configurations in the real lab. > Will I loose my points if I left there in configs commands not required in > the task like "ip inspect log drop-pk", ACE "250 deny ip any any log" or > aliases? Or if I configure as a best practice e.g. "ip mtu" and "ip tcp > adjust-mss" on DMVPN/Tunnel interface but the task don't need it explicitly? > > And small another one:) may I use earplugs in the lab? > > Thanks a lot! > > R. > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
