Thanks Mark If I wanted to just use mgcp, is there a way to control which channels are used. So I can reserve 10 channeles for outgoing and 10 for incoming with a total of 20
On Wed, Oct 29, 2008 at 2:19 PM, Mark Snow <[EMAIL PROTECTED]> wrote: > BTW - that's not to say that I recommend it - but for lab purposes should > be all good.There could be bugs associated with it - and I would > definitely check BugNavigator before putting it into production :) > > cheers, > > -- > Mark Snow > CCIE #14073 (Voice, Security) > > Senior Technical Instructor - IPexpert, Inc. > > Telephone: +1.810.326.1444 > Fax: +1.309.413.4097 > Mailto: [EMAIL PROTECTED] > -- > Join our free online support and peer group communities: > http://www.IPexpert.com/communities > -- > IPexpert - The Global Leader in Self-Study, Classroom-Based, > Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE > R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and > CCIE Storage Lab Certifications. > -- > > On Oct 28, 2008, at 10:20 PM, Paul and Bobs wrote: > > Hi All > > I was wandering if anyone know of a way using both MGCP and H.323 to > control the channells on an E1/T1 circuit. For example - If I have a single > E1 service with only 20 channels and I want to say reserve 5 for outgoing > and reserve 15 for incoming, is there a way on both protocols to do this. > > Thanks > > Paul > > >
