Thanks for the reply. How can this this be achieved. I know from the PABX
world , you can control the number of outbound and inbound channels and
would love to find a way of doing this i the Cisco world on either MGCP or
H.323. Doesnt matter which one (both would be good) but if not then just one
of them.

Cheers

On Wed, Oct 29, 2008 at 11:02 PM, Mark Snow <[EMAIL PROTECTED]> wrote:

> No because you can't create two pri-group timeslot service mgcp commands
> because then you would have to create two mgcp gateways in CUCM and 4.1.3
> won't allow you to do this to the same hostname.
>
> Mark SnowSr Technical Instructor
> IPexpert, Inc.
>
> Sent from my iPhone
>
> On Oct 28, 2008, at 11:36 PM, "Paul and Bobs" <[EMAIL PROTECTED]>
> wrote:
>
> Thanks Mark
>
> If I wanted to just use mgcp, is there a way to control which channels are
> used. So I can reserve 10 channeles for outgoing and 10 for incoming with a
> total of 20
>
> On Wed, Oct 29, 2008 at 2:19 PM, Mark Snow < <[EMAIL PROTECTED]>
> [EMAIL PROTECTED]> wrote:
>
>> BTW - that's not to say that I recommend it - but for lab purposes should
>> be all good. There could be bugs associated with it - and I would
>> definitely check BugNavigator before putting it into production :)
>>
>> cheers,
>>
>> --
>> Mark Snow
>> CCIE #14073 (Voice, Security)
>>
>> Senior Technical Instructor - IPexpert, Inc.
>>
>> Telephone: +1.810.326.1444
>> Fax: +1.309.413.4097
>> Mailto: <[EMAIL PROTECTED]>[EMAIL PROTECTED]
>> --
>> Join our free online support and peer group communities:
>> <http://www.IPexpert.com/communities>http://www.IPexpert.com/communities
>> --
>> IPexpert - The Global Leader in Self-Study, Classroom-Based,
>> Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE
>> R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
>> CCIE Storage Lab Certifications.
>> --
>>
>> On Oct 28, 2008, at 10:20 PM, Paul and Bobs wrote:
>>
>> Hi All
>>
>> I was wandering if anyone know of a way using both MGCP and H.323 to
>> control the channells on an E1/T1 circuit. For example - If I have a single
>> E1 service with only 20 channels and I want to say reserve 5 for outgoing
>> and reserve 15 for incoming, is there a way on both protocols to do this.
>>
>> Thanks
>>
>> Paul
>>
>>
>>
>

Reply via email to