Interesting point. I'll have to set it up and try it. But it might very possibly be done without shaping on a dedicated point to point circuit (not frame relay). I don't see the two as being nailed to each other.
----- Original Message ----- From: "Christian Hennrich" <[email protected]> To: "Kumar, Narinder" <[email protected]> Cc: "Cliff McGlamry" <[email protected]>; <[email protected]> Sent: Monday, March 16, 2009 4:02 AM Subject: Re: [OSL | CCIE_Voice] QOS I think shaping should be in place in very case, only lfi or fragmentation is only needed, when used by low speed links. as far as i know, the LLQ policy map will not work without shaping applied. Correct me if I'm wrong HTH Kumar, Narinder schrieb: > What if it says that the BW between sites is 768Kbps. Do you think that's > the hint. Thanks Narinder > > -----Original Message----- > From: Cliff McGlamry [mailto:[email protected]] > Sent: Monday, 16 March 2009 6:05 PM > To: Kumar, Narinder; [email protected] > Subject: Re: [OSL | CCIE_Voice] QOS > > Re-read, see if it hints at it, if there is a question, ask the proctor. > In > the end, do what it tells you to. > > If you were going to provide shaping, you'd have to have some values to > shape TO. So unless those are provided, you're just throwing numbers in > there. > > > ----- Original Message ----- > From: "Kumar, Narinder" <[email protected]> > To: <[email protected]> > Sent: Monday, March 16, 2009 3:00 AM > Subject: Re: [OSL | CCIE_Voice] QOS > > > All, > If the question is > Between HQ and BR2 configure LFI ( using FRF.12 or MLP) and LLQ. > > Would you still provide shaping or not. > > I guess I am trying to find out from the real lab point of view if the > question doesn't state anything about FR shaping is it a good idea to do > FR > traffic shaping or leave it alone as it is not asked in the question > > Any view ? > > Thanks > Narinder > > > CONFIDENTIALITY - The information contained in this electronic mail > message > is confidential and is intended solely for the addressee(s). If you are > not > an authorised recipient of this message please contact Getronics Australia > immediately by reply email and destroy/delete this message from your > computer. Any unauthorised form of reproduction of this message, or part > thereof, is strictly prohibited. > DISCLAIMER - Unless specifically indicated otherwise, the views and > opinions > expressed in this email are those of the sender and not Getronics > Australia. > While we endeavour to protect our network from computer viruses, Getronics > Australia does not warrant that this email or any attachments are free of > viruses or any other defects or errors. It is the duty of the recipient > to > virus scan and otherwise test any information contained in this email > before > loading onto any computer system. > > > > > > CONFIDENTIALITY - The information contained in this electronic mail > message is confidential and is intended solely for the addressee(s). If > you are not an authorised recipient of this message please contact > Getronics Australia immediately by reply email and destroy/delete this > message from your computer. Any unauthorised form of reproduction of this > message, or part thereof, is strictly prohibited. > DISCLAIMER - Unless specifically indicated otherwise, the views and > opinions expressed in this email are those of the sender and not Getronics > Australia. While we endeavour to protect our network from computer > viruses, Getronics Australia does not warrant that this email or any > attachments are free of viruses or any other defects or errors. It is the > duty of the recipient to virus scan and otherwise test any information > contained in this email before loading onto any computer system. > > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________
