complete configuration is here:
SUB is not started though.
gatekeeper
zone local CME cisco.com 150.1.64.114
zone local CCM cisco.com
no zone subnet CME default enable
zone subnet CME 150.1.66.254/32 enable
no zone subnet CCM default enable
zone subnet CCM 150.1.64.11/32 enable
zone subnet CCM 150.1.64.12/32 enable
zone prefix CME 2404....
zone prefix CCM 3... gw-priority 10 GK_Trunk_2
zone prefix CCM 3... gw-priority 9 GK_Trunk_1
zone prefix CCM 408*
zone prefix CME 5... gw-priority 10 RS2
zone prefix CME 6... gw-priority 10 RS2
zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2
gw-type-prefix 1#* default-technology
no shutdown
GATEWAY TYPE PREFIX TABLE
=========================
Prefix: 1#* (Default gateway-technology)
Zone CCM master gateway list:
150.1.64.11:3865 GK_1
Zone CCM prefix 3... priority gateway list(s):
Priority 9:
150.1.64.11:3865 GK_1
configuration with dot style is working. like 3... instead of 3*
but I cannot see CME under show gatekeeper gw command
Any idea?
Jeremy
On Fri, Apr 17, 2009 at 8:00 AM, Marwa Ahmed <[email protected]>wrote:
> hi,
>
> is the cme registered? also do u have another local zone called CME other
> than CCM
>
> ------------------------------
> *From:* [email protected] on behalf of jeremy co
> *Sent:* Thu 4/16/2009 7:55 PM
> *To:* [email protected]
> *Subject:* [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>
> Hi,
>
> I cannot make trunk prefix and GW priority showing up under "sh gatekeeper
> gw"
>
> zone local CCM cisco.com
> zone prefix CME 6... gw-priority 10 RS2
> no shutdown
>
> GK#sh gatekeeper g
> GATEWAY TYPE PREFIX TABLE
> =========================
>
> I got nothing here
>
> any idea?
>
>
> Jeremy
>
>
>
