Hi,
interface Loopback0
ip address 150.1.66.254 255.255.255.0
h323-gateway voip interface
h323-gateway voip id CME ipaddr 150.1.64.114 1719
h323-gateway voip h323-id RS2
h323-gateway voip bind srcaddr 150.1.66.254
CME is registered.
C2600#sh gatekeeper end
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
150.1.64.11 2059 150.1.64.11 3776 CCM VOIP-GW
H323-ID: GK_Trunk_1
Voice Capacity Max.= Avail.= Current.= 0
150.1.66.254 1720 150.1.66.254 50245 CME VOIP-GW
E164-ID: 6003
E164-ID: 6004
H323-ID: RS2
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 2
I made a call with dot configuration and it worked.
ANy way why I cannot see CME under sh gatekeeper gw?
Sergio I have them under gw interface
Any idea?
Cheers
Jeremy
On Sat, Apr 18, 2009 at 12:13 AM, Cliff McGlamry <[email protected]> wrote:
> Just because the dots show up doesn't mean they will work....but heck,
> give it a try. We all might learn something.
>
> If CME won't register, what does the output of the show gateway command on
> CME show? And please post the configuration of the interface where you
> engaged the h323-gateway commands.
>
>
> ----- Original Message -----
> *From:* jeremy co <[email protected]>
> *To:* Marwa Ahmed <[email protected]> ; Cliff
> McGlamry<[email protected]>; Arshad
> Dhunna <[email protected]>
> *Cc:* [email protected]
> *Sent:* Friday, April 17, 2009 9:51 AM
> *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>
>
> complete configuration is here:
> SUB is not started though.
>
> gatekeeper
> zone local CME cisco.com 150.1.64.114
> zone local CCM cisco.com
> no zone subnet CME default enable
> zone subnet CME 150.1.66.254/32 enable
> no zone subnet CCM default enable
> zone subnet CCM 150.1.64.11/32 enable
> zone subnet CCM 150.1.64.12/32 enable
> zone prefix CME 2404....
> zone prefix CCM 3... gw-priority 10 GK_Trunk_2
> zone prefix CCM 3... gw-priority 9 GK_Trunk_1
> zone prefix CCM 408*
> zone prefix CME 5... gw-priority 10 RS2
> zone prefix CME 6... gw-priority 10 RS2
> zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2
> gw-type-prefix 1#* default-technology
> no shutdown
>
> GATEWAY TYPE PREFIX TABLE
> =========================
> Prefix: 1#* (Default gateway-technology)
> Zone CCM master gateway list:
> 150.1.64.11:3865 GK_1
> Zone CCM prefix 3... priority gateway list(s):
> Priority 9:
> 150.1.64.11:3865 GK_1
>
>
> configuration with dot style is working. like 3... instead of 3*
>
> but I cannot see CME under show gatekeeper gw command
>
> Any idea?
>
>
> Jeremy
>
>
>
> On Fri, Apr 17, 2009 at 8:00 AM, Marwa Ahmed <[email protected]>wrote:
>
>> hi,
>>
>> is the cme registered? also do u have another local zone called CME other
>> than CCM
>>
>> ------------------------------
>> *From:* [email protected] on behalf of jeremy co
>> *Sent:* Thu 4/16/2009 7:55 PM
>> *To:* [email protected]
>> *Subject:* [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>>
>> Hi,
>>
>> I cannot make trunk prefix and GW priority showing up under "sh
>> gatekeeper gw"
>>
>> zone local CCM cisco.com
>> zone prefix CME 6... gw-priority 10 RS2
>> no shutdown
>>
>> GK#sh gatekeeper g
>> GATEWAY TYPE PREFIX TABLE
>> =========================
>>
>> I got nothing here
>>
>> any idea?
>>
>>
>> Jeremy
>>
>>
>>
>
