1# is a default prefix for call manager, I added it already in CCM config

Jeremy

On Sat, Apr 18, 2009 at 12:31 AM, marwa <[email protected]> wrote:

>
> hi,
> to see it add the tech prefix under the interface in cme
>
> ----- Original Message -----
>
> *From:* jeremy co <[email protected]>
> *To:* Cliff McGlamry <[email protected]> ; Sergio 
> Polizer<[email protected]>
> *Cc:* Marwa Ahmed <[email protected]> ; Arshad 
> Dhunna<[email protected]>;
> [email protected]
> *Sent:* Friday, April 17, 2009 4:24 PM
> *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>
> Hi,
>
> interface Loopback0
>  ip address 150.1.66.254 255.255.255.0
>  h323-gateway voip interface
>  h323-gateway voip id CME ipaddr 150.1.64.114 1719
>  h323-gateway voip h323-id RS2
>  h323-gateway voip bind srcaddr 150.1.66.254
>
>
> CME is registered.
>
> C2600#sh gatekeeper end
>                     GATEKEEPER ENDPOINT REGISTRATION
>                     ================================
> CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags
> --------------- ----- --------------- ----- ---------         ----    -----
> 150.1.64.11     2059  150.1.64.11     3776  CCM               VOIP-GW
>     H323-ID: GK_Trunk_1
>     Voice Capacity Max.=  Avail.=  Current.= 0
> 150.1.66.254    1720  150.1.66.254    50245 CME               VOIP-GW
>     E164-ID: 6003
>     E164-ID: 6004
>     H323-ID: RS2
>     Voice Capacity Max.=  Avail.=  Current.= 0
> Total number of active registrations = 2
>
>
> I made a call with dot configuration and it worked.
> ANy way why I cannot see CME under sh gatekeeper gw?
>
> Sergio I have them under gw interface
>
>
> Any idea?
>
> Cheers
>
> Jeremy
>
>
>
> On Sat, Apr 18, 2009 at 12:13 AM, Cliff McGlamry <[email protected]>wrote:
>
>>  Just because the dots show up doesn't mean they will work....but heck,
>> give it a try.  We all might learn something.
>>
>> If CME won't register, what does the output of the show gateway command on
>> CME show?  And please post the configuration of the interface where you
>> engaged the h323-gateway commands.
>>
>>
>>  ----- Original Message -----
>> *From:* jeremy co <[email protected]>
>>   *To:* Marwa Ahmed <[email protected]> ; Cliff 
>> McGlamry<[email protected]>; Arshad
>> Dhunna <[email protected]>
>> *Cc:* [email protected]
>> *Sent:* Friday, April 17, 2009 9:51 AM
>> *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>>
>>
>> complete configuration is here:
>> SUB is not started though.
>>
>> gatekeeper
>>  zone local CME cisco.com 150.1.64.114
>>  zone local CCM cisco.com
>>  no zone subnet CME default enable
>>  zone subnet CME 150.1.66.254/32 enable
>>  no zone subnet CCM default enable
>>  zone subnet CCM 150.1.64.11/32 enable
>>  zone subnet CCM 150.1.64.12/32 enable
>>  zone prefix CME 2404....
>>  zone prefix CCM 3... gw-priority 10 GK_Trunk_2
>>  zone prefix CCM 3... gw-priority 9 GK_Trunk_1
>>  zone prefix CCM 408*
>>  zone prefix CME 5... gw-priority 10 RS2
>>  zone prefix CME 6... gw-priority 10 RS2
>>  zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2
>>  gw-type-prefix 1#* default-technology
>>  no shutdown
>>
>> GATEWAY TYPE PREFIX TABLE
>> =========================
>> Prefix: 1#*    (Default gateway-technology)
>>   Zone CCM master gateway list:
>>     150.1.64.11:3865 GK_1
>>   Zone CCM prefix 3... priority gateway list(s):
>>    Priority 9:
>>     150.1.64.11:3865 GK_1
>>
>>
>> configuration with dot style is working. like 3... instead of 3*
>>
>> but I cannot see CME under show gatekeeper gw command
>>
>> Any idea?
>>
>>
>> Jeremy
>>
>>
>>
>> On Fri, Apr 17, 2009 at 8:00 AM, Marwa Ahmed <[email protected]>wrote:
>>
>>>  hi,
>>>
>>> is the cme registered? also do u have another local zone called CME
>>> other than CCM
>>>
>>> ------------------------------
>>> *From:* [email protected] on behalf of jeremy co
>>> *Sent:* Thu 4/16/2009 7:55 PM
>>> *To:* [email protected]
>>> *Subject:* [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>>>
>>>   Hi,
>>>
>>> I cannot make trunk prefix and GW priority showing up under  "sh
>>> gatekeeper gw"
>>>
>>>  zone local CCM cisco.com
>>>  zone prefix CME 6... gw-priority 10 RS2
>>>  no shutdown
>>>
>>> GK#sh gatekeeper g
>>> GATEWAY TYPE PREFIX TABLE
>>> =========================
>>>
>>> I got nothing here
>>>
>>> any idea?
>>>
>>>
>>> Jeremy
>>>
>>>
>>>
>>
>

Reply via email to