I have a prefix for it so why it didn't show up?
gatekeeper
zone local CME cisco.com 150.1.64.114
zone local CCM cisco.com
no zone subnet CME default enable
zone subnet CME 150.1.66.254/32 enable
no zone subnet CCM default enable
zone subnet CCM 150.1.64.11/32 enable
zone subnet CCM 150.1.64.12/32 enable
zone prefix CME 2404....
zone prefix CCM 3... gw-priority 10 GK_Trunk_2
zone prefix CCM 3... gw-priority 9 GK_Trunk_1
zone prefix CCM 408*
zone prefix CME 5... gw-priority 10 RS2
zone prefix CME 6... gw-priority 10 RS2
zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2
gw-type-prefix 1#* default-technology
no shutdown
GATEWAY TYPE PREFIX TABLE
=========================
Prefix: 1#* (Default gateway-technology)
Zone CCM master gateway list:
150.1.64.11:3865 GK_1
Zone CCM prefix 3... priority gateway list(s):
Priority 9:
150.1.64.11:3865 GK_1
On Sat, Apr 18, 2009 at 12:55 AM, Cliff McGlamry <[email protected]> wrote:
> They can overlap. It's okay for it to be that way as long as you have
> zone prefixes defined. Or give it a different prefix....but you need one in
> there for it to show up under that command.
>
>
>
> ----- Original Message -----
> *From:* jeremy co <[email protected]>
> *To:* marwa <[email protected]>
> *Cc:* [email protected]
> *Sent:* Friday, April 17, 2009 10:37 AM
> *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>
> 1# is a default prefix for call manager, I added it already in CCM config
>
>
> Jeremy
>
> On Sat, Apr 18, 2009 at 12:31 AM, marwa <[email protected]> wrote:
>
>>
>> hi,
>> to see it add the tech prefix under the interface in cme
>>
>> ----- Original Message -----
>>
>> *From:* jeremy co <[email protected]>
>> *To:* Cliff McGlamry <[email protected]> ; Sergio
>> Polizer<[email protected]>
>> *Cc:* Marwa Ahmed <[email protected]> ; Arshad
>> Dhunna<[email protected]>;
>> [email protected]
>> *Sent:* Friday, April 17, 2009 4:24 PM
>> *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>>
>> Hi,
>>
>> interface Loopback0
>> ip address 150.1.66.254 255.255.255.0
>> h323-gateway voip interface
>> h323-gateway voip id CME ipaddr 150.1.64.114 1719
>> h323-gateway voip h323-id RS2
>> h323-gateway voip bind srcaddr 150.1.66.254
>>
>>
>> CME is registered.
>>
>> C2600#sh gatekeeper end
>> GATEKEEPER ENDPOINT REGISTRATION
>> ================================
>> CallSignalAddr Port RASSignalAddr Port Zone Name Type
>> Flags
>> --------------- ----- --------------- ----- --------- ----
>> -----
>> 150.1.64.11 2059 150.1.64.11 3776 CCM VOIP-GW
>> H323-ID: GK_Trunk_1
>> Voice Capacity Max.= Avail.= Current.= 0
>> 150.1.66.254 1720 150.1.66.254 50245 CME VOIP-GW
>> E164-ID: 6003
>> E164-ID: 6004
>> H323-ID: RS2
>> Voice Capacity Max.= Avail.= Current.= 0
>> Total number of active registrations = 2
>>
>>
>> I made a call with dot configuration and it worked.
>> ANy way why I cannot see CME under sh gatekeeper gw?
>>
>> Sergio I have them under gw interface
>>
>>
>> Any idea?
>>
>> Cheers
>>
>> Jeremy
>>
>>
>>
>> On Sat, Apr 18, 2009 at 12:13 AM, Cliff McGlamry <[email protected]>wrote:
>>
>>> Just because the dots show up doesn't mean they will work....but heck,
>>> give it a try. We all might learn something.
>>>
>>> If CME won't register, what does the output of the show gateway command
>>> on CME show? And please post the configuration of the interface where you
>>> engaged the h323-gateway commands.
>>>
>>>
>>> ----- Original Message -----
>>> *From:* jeremy co <[email protected]>
>>> *To:* Marwa Ahmed <[email protected]> ; Cliff
>>> McGlamry<[email protected]>; Arshad
>>> Dhunna <[email protected]>
>>> *Cc:* [email protected]
>>> *Sent:* Friday, April 17, 2009 9:51 AM
>>> *Subject:* Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>>>
>>>
>>> complete configuration is here:
>>> SUB is not started though.
>>>
>>> gatekeeper
>>> zone local CME cisco.com 150.1.64.114
>>> zone local CCM cisco.com
>>> no zone subnet CME default enable
>>> zone subnet CME 150.1.66.254/32 enable
>>> no zone subnet CCM default enable
>>> zone subnet CCM 150.1.64.11/32 enable
>>> zone subnet CCM 150.1.64.12/32 enable
>>> zone prefix CME 2404....
>>> zone prefix CCM 3... gw-priority 10 GK_Trunk_2
>>> zone prefix CCM 3... gw-priority 9 GK_Trunk_1
>>> zone prefix CCM 408*
>>> zone prefix CME 5... gw-priority 10 RS2
>>> zone prefix CME 6... gw-priority 10 RS2
>>> zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2
>>> gw-type-prefix 1#* default-technology
>>> no shutdown
>>>
>>> GATEWAY TYPE PREFIX TABLE
>>> =========================
>>> Prefix: 1#* (Default gateway-technology)
>>> Zone CCM master gateway list:
>>> 150.1.64.11:3865 GK_1
>>> Zone CCM prefix 3... priority gateway list(s):
>>> Priority 9:
>>> 150.1.64.11:3865 GK_1
>>>
>>>
>>> configuration with dot style is working. like 3... instead of 3*
>>>
>>> but I cannot see CME under show gatekeeper gw command
>>>
>>> Any idea?
>>>
>>>
>>> Jeremy
>>>
>>>
>>>
>>> On Fri, Apr 17, 2009 at 8:00 AM, Marwa Ahmed <[email protected]>wrote:
>>>
>>>> hi,
>>>>
>>>> is the cme registered? also do u have another local zone called CME
>>>> other than CCM
>>>>
>>>> ------------------------------
>>>> *From:* [email protected] on behalf of jeremy co
>>>> *Sent:* Thu 4/16/2009 7:55 PM
>>>> *To:* [email protected]
>>>> *Subject:* [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
>>>>
>>>> Hi,
>>>>
>>>> I cannot make trunk prefix and GW priority showing up under "sh
>>>> gatekeeper gw"
>>>>
>>>> zone local CCM cisco.com
>>>> zone prefix CME 6... gw-priority 10 RS2
>>>> no shutdown
>>>>
>>>> GK#sh gatekeeper g
>>>> GATEWAY TYPE PREFIX TABLE
>>>> =========================
>>>>
>>>> I got nothing here
>>>>
>>>> any idea?
>>>>
>>>>
>>>> Jeremy
>>>>
>>>>
>>>>
>>>
>>
>
