Thanks Funkychild, it works perfectly!!!
2014-05-11 3:07 GMT+02:00 funky <[email protected]>: > Hi, > > The PDF file you refer to is a good start but two main steps are missing : > > ephone-dn creation > ephone configuration > > Here are some simple explanations for ephone-dn creation : > > ephone-dn 1 dual-line > ! Enters ephone-dn configuration mode to create a directory number. > Enables two calls per directory number. > number 1001 > ! Assigns directory number. > > And now some explanations for ephone configuration : > > ephone 1 > ! Enters ephone configuration mode. > mac-address HHHH.HHHH.HHHH > ! Specifies the MAC address of the IP phone that is being configured. > type 7921 > ! Specifies the type of phone. > button 1:1 > ! Associates a button number and line characteristics with an extension > (ephone-dn) > > > To change the phone IP parameters, on the phone issue : > > Settings > Network settings > !unlock the configuration by pressing **#, the lock in the upper right > corner of the screen should open > ipv4 settings > > HTH > > Funkychild > > > ------------------------------ > Date: Sat, 10 May 2014 23:41:28 +0200 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [OSL | CCIE_Wireless] Cisco CME router installation > > > Hi Jeff, > > Thanks for your answer. I was able to achieve the 1st part of the > configuration in my lab. > > I already had a 2851 as a GW. I had to change the code to 12.4(24)T > ADVIPSERVICES, and my CME is now running and configured. I have transferred > the firmware files for my 2 phones (7960 and 7925) as described here: > http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/68244-PhoneLoadUpgradeCCME.html > > My 7960 phone which is currently connected to my lab doesn't get an IP > from my DHCP server, so I can't test further. After a SPAN on the phone > port, I can see it is already configured with a static IP address (from a > previous lab from one of my colleagues I think). > > I won't have a physical access to the lab until monday, so that's all I > can do for the week-end! > > Andre. > > > 2014-05-10 23:28 GMT+02:00 Jeff Rensink <[email protected]>: > > I think your cheapest option would be a 2811. You may have to drop back > to an earlier version of CME. But that's what I use in my little personal > lab with a 7925 and a real basic wired phone. > > If you go with the 2900 series, then you need to buy a voice license. > The 2800 series doesn't require that. > > Regards, > > > > Jeff Rensink : Sr Instructor : iPexpert <http://www.ipexpert.com/> > > CCIE # 24834 :: Wireless / R&S > > :: World-Class Cisco Certification Training > > Direct: +1.810.326.1444 > > :: Free Videos <http://www.youtube.com/ipexpertinc> > > :: Free Training / Product Offerings <http://www.facebook.com/ipexpert> > > :: CCIE Blog <http://blog.ipexpert.com/> > :: Twitter <http://www.twitter.com/ipexpert> > > > On Sat, May 10, 2014 at 12:03 PM, Andre Aubet <[email protected]> wrote: > > Hi there, > > I need to install a Cisco CME router in my lab, but not sure where to > begin to achieve this... > > I already have a wired IP Phone and a 7921 to test the wireless part. > > First, which router model can I choose. I found this documentation: > > http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme91spc.html > > I can get any of the supported routers in this list, so it shouldn't be a > problem. > > Does anyone can say me if I need other modules or maybe licences to make > it run? > > Also, do you have any documentation for basic configuration? I found this > pdf, but not sure this is enough to have my 2 phones working: > https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/6346-102-1-20737/CCNA-Voice%20VoIP.pdf > > Any help would be greatly appreciated :) > > Andre. > > _______________________________________________ > Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: > > iPexpert on YouTube: www.youtube.com/ipexpertinc > > > > > _______________________________________________ Free CCIE R&S, > Collaboration, Data Center, Wireless & Security Videos :: iPexpert on > YouTube: www.youtube.com/ipexpertinc >
_______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
