Using the measurements provided by Vince I've rejigged the drawing a bit and it
ought to be closer.
I hope this shows what was meant by the angled corner part, seems logical to
have it like that.
The radii 'too small to measure' without a gauge was entered as 1/16" and it
looks acceptable.
Basic layout, no measurements just a cm/inch scale:
http://web.aanet.com.au/~malikoff/pdp11/DEC_H960_stabiliser_foot_left_A-H952-BA_revision_2.jpg
Measurements (my CAD program converts everything to metric, when I entered in
Vince's measurements):
http://web.aanet.com.au/~malikoff/pdp11/DEC_H960_stabiliser_foot_left_A-H952-BA_revision_2_dimensioned.jpg
How it might look, so far, attached to the H960 (no kickplate):
http://web.aanet.com.au/~malikoff/pdp11/DEC_H960_stabiliser_foot_left_A-H952-BA_revision_2_placed.jpg
I had thought the hole in the front corner of the H960 was for a front panel
pivot, but it seems the foot
does actually use it.
I don't have the kickplate nor access to measuring one, so that probably
changes it a bit too.
Steve.
