>From: Fernan Aguero <[EMAIL PROTECTED]>
>Hi all!
>The problem: I have a 650MB/74 min CD-R with audio tracks in it. However
>when i tried to use cdda2wav + cdrecord or cdrdao (copy) to do a copy of
>the CD, it just failed.
>Strangely enough, there were different reasons.
>cdrecord gave me a 'track servo failure' twice (after suceeding a dummy
>write), and a 'logical block address out of range' once and two or three
>times it just quited saying that the disc space needed would be more than
>that available.
>cdrdao also succeded on --simulate but failed at writing
>(retryable error).
>After this i noticed that indeed the tracks were requesting about 680 MB of
>space on disk (as .wav files). However cdrecord also failed to write a
>subselection of tracks that would fit the media (see below).
>I know the media was right because I already wrote other audio stuff onto
>it...
>Track 09: Total bytes read/written: 32121264/32121264 (13657 sectors).
>Track 10: Total bytes read/written: 43036896/43036896 (18298 sectors).
>Track 11: Total bytes read/written: 54966240/54966240 (23370 sectors).
>Track 12: Total bytes read/written: 36808800/36808800 (15650 sectors).
>cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
>CDB: 2A 00 00 03 29 89 00 00 0D 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.116s timeout 40s
>write track data: error after 12964224 bytes
>Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
A buffer underrun! Configure your SCSI bus correctly.
Disconnect/recconnect must be on for all targets.
>[root@iib005 fernan]# /opt/schily/bin/cdrecord dev=0,6,0 -dummy -nofix
>-audio audioFiles_01.wav audioFiles_02.wav audioFiles_03.wav
>Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling
>scsidev: '0,6,0'
>scsibus: 0 target: 6 lun: 0
>Linux sg driver version: 2.1.36
>Using libscg version 'schily-0.1'
>Device type : Removable CD-ROM
>Version : 2
>Response Format: 2
>Capabilities :
>Vendor_info : 'YAMAHA '
>Identifikation : 'CDR400t '
>Revision : '1.0q'
>Device seems to be: Yamaha CDR-400.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Starting to write CD/DVD at speed 1 in dummy mode for single session.
>Last chance to quit, starting dummy write in 1 seconds.
>/opt/schily/bin/cdrecord: Input/output error. write_g1: scsi sendcmd:
>retryable error
>CDB: 2A 00 00 03 3F 03 00 00 1B 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 04 D1 C0 00 00 0A 00 00 00 00 09 01 00 00
>Sense Key: 0x4 Hardware Error, Segment 0
>Sense Code: 0x09 Qual 0x01 (tracking servo failure) Fru 0x0
>Sense flags: Blk -775946240 (not valid)
>write track data: error after 12573792 bytes
>Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Clean the lens or use different media.
J�rg
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
