On Thu, 11 Apr 2002, Joerg Schilling wrote: > >We purchased it from Luminex (http://www.luminex.com), but Panasonic is > >the manufacturer. > > NO idea what this is.... it definitely has different behaving firmware > than the 3xx series. > > Did you try -dao ?? > >
This seems to convince it to make an attempt, but it fails after a couple minutes. Output below. -adam [root@chromium tmp]# ls -lth track-01.img -rw-rw-r-- 1 root root 4.1G Apr 11 10:59 track-01.img [root@chromium tmp]# ./cdrecord-prodvd-1.11b19-i586-pc-linux-gnu dev=1,1,0 -dao track-01.img Cdrecord-ProDVD-Clone 1.11b19 (i586-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling Unlocked features: ProDVD Clone Limited features: speed This copy of cdrecord is licensed for: private/research/educational_non-commercial_use scsidev: '1,1,0' scsibus: 1 target: 1 lun: 0 Linux sg driver version: 3.1.20 Using libscg version 'schily-0.6' Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'MATSHITA' Identifikation : 'DVD-R SW-9501 ' Revision : 'S222' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd). Driver flags : SWABAUDIO Supported modes: PACKET SAO SAO/R96P SAO/R96R Starting to write CD/DVD at speed 1 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. ./cdrecord-prodvd-1.11b19-i586-pc-linux-gnu: WARNING: Drive returns wrong startsec (0) using -150 ./cdrecord-prodvd-1.11b19-i586-pc-linux-gnu: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 0B 00 00 00 00 0A 00 00 00 00 4E 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x4E Qual 0x00 (overlapped commands attempted) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 101.000s timeout 100s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 ./cdrecord-prodvd-1.11b19-i586-pc-linux-gnu: Input/output error. flush cache: scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 0B 00 00 00 00 0A 00 00 00 00 4E 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x4E Qual 0x00 (overlapped commands attempted) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 1000s Trouble flushing the cache ./cdrecord-prodvd-1.11b19-i586-pc-linux-gnu: Input/output error. prevent/allow medium removal: scsi sendcmd: no error CDB: 1E 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 0B 00 00 00 00 0A 00 00 00 00 4E 00 00 00 Sense Key: 0xB Aborted Command, Segment 0 Sense Code: 0x4E Qual 0x00 (overlapped commands attempted) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 100s [root@chromium tmp]# -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
