The system wouldn't boot after sp3 was applied. According to the Promise website the problem is only with the ultra 100 card. The work around last I checked, and the one I used was to use the 100 tx 2 driver. After I did all was well.
John -----Original Message----- From: Eric Bradfield [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 05, 2002 10:36 AM To: CF-Server Subject: RE: Win2k SP3 What kinds of problems were you having with your Promise Ultra 100 card? Just wondering because I have one in my system. A Promise Ultra 100 TX2. Thanks, Eric -----Original Message----- From: John Munyan [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 05, 2002 9:37 AM To: CF-Server Subject: RE: Win2k SP3 I had a problem with a promise ultra 100 pci card. -----Original Message----- From: Dave Watts [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 05, 2002 9:38 AM To: CF-Server Subject: RE: Win2k SP3 > Has anyone here upgraded to Service Pack 3 for Win2k and had > any problems or heard of any? I've upgraded several machines without incident. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ voice: (202) 797-5496 fax: (202) 797-5444 ______________________________________________________________________ Structure your ColdFusion code with Fusebox. Get the official book at http://www.fusionauthority.com/bkinfo.cfm ------------------------------------------------------------------------------ To unsubscribe, send a message to [EMAIL PROTECTED] with 'unsubscribe' in the body or visit the list page at www.houseoffusion.com
