El Viernes, 6 de Octubre de 2006 23:53, Carlitux escribió:
> Hello Alvaro.
>
> Just my first time testing the cherokee web server, and I found a TRIVIAL
> bug on the init script.I'm using Fedora Core 5 on a x86_64 based system and
> wanted to start cherokee on startup, so I followed trying some steps:
>
> FC (and any RH-based distro) doesn't have the update-rc.d script; instead,
> they have chkconfig. So, I created the link on /etc/rc.d and tried to
> enable cherokee on chkconfig, but it failed,
>
> I build the last 0.5.5 tarball source, and all goes very good, so I went to
> copy de contrib/cherokee init script to my /etc/init.d/ directory and for
> make a link to the especial init scripts on /etc/rc[x].d, I use the redhat
> chkconfig util,
>
> [EMAIL PROTECTED] init.d]# chkconfig --add cherokee
> service cherokee does not support chkconfig
>
> but I realize that the special line for chkconfig wasn't there, and all the
> things I need for cherokee to start on my Fedora 5 x86_64 based system,
> (ANGEL OF GOODNESS come to me and inspire me), so I made some investigation
> of your DAEMON and the arguments, to finally wrote a contrib REDHAT FEDORA
> compliant cherokee init script for all the folks who have problems with the
> init so this is the new contrib/cherokee.server.fedora compliant:
>
> ******************************************************************
> #!/bin/sh
> #
> # Contrib to RedHat Fedora Based Systems by: [EMAIL PROTECTED]
> # chkconfig: 2345 95 05
> # description: Starts and stops the Cherokee ligth Web Server system
> #
>
> # Source function library
> . /etc/rc.d/init.d/functions
>
> NAME=cherokee
> BASE=/usr/local/cherokee/sbin/$NAME
> DAEMON="-b"
> CONF="/etc/cherokee/cherokee.conf"
> PIDFILE="/var/run/$NAME.pid"
>
> # Check that $BASE exists.
> [ -f $BASE ] || exit 0
>
> # Source networking configuration.
> . /etc/sysconfig/network
>
> # Check that networking is up.
> [ ${NETWORKING} = "no" ] && exit 0
>
> RETVAL=0
> # See how we were called.
> case "$1" in
> start)
> if [ -n "`/sbin/pidof $NAME`" ]; then
> echo -n $"$NAME: already running"
> echo ""
> exit $RETVAL
> fi
> echo -n "Starting Cherokee service: "
> $BASE -C $CONF $DAEMON pidfile $PIDFILE
> sleep 1
> action "" /sbin/pidof $NAME
> RETVAL=$?
> [ $RETVAL -eq 0 ] && touch /var/lock/subsys/cherokee
> ;;
> stop)
> echo -n "Shutting down Cherokee service: "
> killproc $BASE
> RETVAL=$?
> echo
> [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/cherokee
> ;;
> restart|reload)
> $0 stop
> $0 start
> RETVAL=$?
> ;;
> status)
> status $BASE
> RETVAL=$?
> ;;
> *)
> echo "Usage: $NAME {start|stop|restart|reload|status}"
> exit 1
> esac
>
> exit $RETVAL
>
> ******************************************************************
>
> Now everything is fine:
>
> [EMAIL PROTECTED] init.d]# chkconfig --add cherokee
>
> [EMAIL PROTECTED] init.d]# chkconfig cherokee on
> [EMAIL PROTECTED] init.d]# service cherokee start
> Starting cherokee ...
>
> I could provide a patch, but I don't know how to send the initial script is
> generated. So, long story short, this issue requires many changes
>
> Thats all Budy !!!
> The Cherokee Server just fine on my Fedora 5 x86_64 based system
> I hope you can made the changes to that script, or at least, made one
> called contrib/cherokee.server.fedora with this contrib.
>
> I forgot to tell, I'm a former teacher of operating systems at my
> university, and the shell programing is a base of that, so I came up with
> this thing.
>
> Regards,
Ummmmmmmm, that seems to work fine, of course.
I'm afraid that there's already one start script for cherokee, which is
skeleton-based, here it is:
#!/bin/sh
#
# Fedora Linux init script for cherokee webserver, by Manuel Arostegui
#Ramirez, original cherokee.init for Suse by:
# Marcus Rueckert, SUSE / Novell Inc.
# Copyright (C) 2006 Marcus Rueckert, SUSE / Novell Inc.
#
# This init script has the same license as the cherokee package itself.
#
# /etc/init.d/cherokee
# and its symbolic link
# /(usr/)sbin/rccherokee
#
# LSB compatible service control script; see http://www.linuxbase.org/spec/
# Please send feedback to http://www.suse.de/feedback/
#
# Note: This template uses functions rc_XXX defined in /etc/rc.status on
# UnitedLinux/SUSE/Novell based Linux distributions. However, it will work
# on other distributions as well, by using the LSB (Linux Standard Base)
# or RH functions or by open coding the needed functions.
# Read http://www.tldp.org/HOWTO/HighQuality-Apps-HOWTO/ if you prefer not
# to use this template.
#
# chkconfig: 345 99 00
# description: FOO XYZ daemon providing ZYX
#
### BEGIN INIT INFO
# Provides: cherokee
# Required-Start: $syslog $remote_fs
# Should-Start: $time ypbind sendmail
# Required-Stop: $syslog $remote_fs
# Should-Stop: $time ypbind sendmail
# Default-Start: 3 5
# Default-Stop: 0 1 2 6
# Short-Description: cherokee is a fast webserver
# Description: cherokee is a fast webserver
### END INIT INFO
#
# Any extensions to the keywords given above should be preceeded by
# X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB.
#
# Notes on Required-Start/Should-Start:
# * There are two different issues that are solved by Required-Start
# and Should-Start
# (a) Hard dependencies: This is used by the runlevel editor to determine
# which services absolutely need to be started to make the start of
# this service make sense. Example: nfsserver should have
# Required-Start: $portmap
# Also, required services are started before the dependent ones.
# The runlevel editor will warn about such missing hard dependencies
# and suggest enabling. During system startup, you may expect an error,
# if the dependency is not fulfilled.
# (b) Specifying the init script ordering, not real (hard) dependencies.
# This is needed by insserv to determine which service should be
# started first (and at a later stage what services can be started
# in parallel). The tag Should-Start: is used for this.
# It tells, that if a service is available, it should be started
# before. If not, never mind.
# * When specifying hard dependencies or ordering requirements, you can
# use names of services (contents of their Provides: section)
# or pseudo names starting with a $. The following ones are available
# according to LSB (1.1):
# $local_fs all local file systems are mounted
# (most services should need this!)
# $remote_fs all remote file systems are mounted
# (note that /usr may be remote, so
# many services should Require this!)
# $syslog system logging facility up
# $network low level networking (eth card, ...)
# $named hostname resolution available
# $netdaemons all network daemons are running
# The $netdaemons pseudo service has been removed in LSB 1.2.
# For now, we still offer it for backward compatibility.
# These are new (LSB 1.2):
# $time the system time has been set correctly
# $portmap SunRPC portmapping service available
# UnitedLinux/SUSE/Novell extensions:
# $ALL indicates that a script should be inserted
# at the end
# * The services specified in the stop tags
# (Required-Stop/Should-Stop)
# specify which services need to be still running when this service
# is shut down. Often the entries there are just copies or a subset
# from the respective start tag.
# * Should-Start/Stop are now part of LSB as of 2.0,
# formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop.
# insserv does support both variants.
# * X-UnitedLinux-Default-Enabled: yes/no is used at installation time
# (%fillup_and_insserv macro in %post of many RPMs) to specify whether
# a startup script should default to be enabled after installation.
# It's not used by insserv.
#
# Note on runlevels:
# 0 - halt/poweroff 6 - reboot
# 1 - single user 2 - multiuser without network exported
# 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm)
#
# Note on script names:
# http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html
# A registry has been set up to manage the init script namespace.
# http://www.lanana.org/
# Please use the names already registered or register one or use a
# vendor prefix.
# Check for missing binaries (stale symlinks should not happen)
# Note: Special treatment of stop for LSB conformance
CHEROKEE_BIN=/usr/sbin/cherokee
test -x $CHEROKEE_BIN || { echo "$CHEROKEE_BIN not installed";
if [ "$1" = "stop" ]; then exit 0;
else exit 5; fi; }
# Check for existence of needed config file and read it
# CHEROKEE_CONFIG=/etc/sysconfig/cherokee
# test -r $CHEROKEE_CONFIG || { echo "$CHEROKEE_CONFIG not existing";
# if [ "$1" = "stop" ]; then exit 0;
# else exit 6; fi; }
# Read config
# . $CHEROKEE_CONFIG
# Source LSB init functions
# providing start_daemon, killproc, pidofproc,
# log_success_msg, log_failure_msg and log_warning_msg.
# This is currently not used by UnitedLinux based distributions and
# not needed for init scripts for UnitedLinux only. If it is used,
# the functions from rc.status should not be sourced or used.
#. /lib/lsb/init-functions
# Shell functions sourced from /etc/rc.status:
# rc_check check and set local and overall rc status
# rc_status check and set local and overall rc status
# rc_status -v be verbose in local rc status and clear it afterwards
# rc_status -v -r ditto and clear both the local and overall rc status
# rc_status -s display "skipped" and exit with status 3
# rc_status -u display "unused" and exit with status 3
# rc_failed set local and overall rc status to failed
# rc_failed <num> set local and overall rc status to <num>
# rc_reset clear both the local and overall rc status
# rc_exit exit appropriate to overall rc status
# rc_active checks whether a service is activated by symlinks
# Use the SUSE rc_ init script functions;
# emulate them on LSB, RH and other systems
# Default: Assume sysvinit binaries exist
if test -e /etc/rc.status; then
# SUSE rc script library
. /etc/rc.status
else
export LC_ALL=POSIX
start_daemon() { return /sbin/start_daemon ${1+"$@"}; }
killproc() { return /sbin/killproc ${1+"$@"}; }
pidofproc() { return /sbin/pidofproc ${1+"$@"}; }
checkproc() { return /sbin/checkproc ${1+"$@"}; }
_cmd=$1
declare -a _SMSG
if test "${_cmd}" = "status"; then
_SMSG=(running dead dead unused unknown reserved)
_RC_UNUSED=3
else
_SMSG=(done failed failed missed failed skipped unused failed failed
reserved)
_RC_UNUSED=6
fi
if test -e /lib/lsb/init-functions; then
# LSB
. /lib/lsb/init-functions
echo_rc()
{
if test ${_RC_RV} = 0; then
log_success_msg " [${_SMSG[${_RC_RV}]}] "
else
log_failure_msg " [${_SMSG[${_RC_RV}]}] "
fi
}
# TODO: Add checking for lockfiles
checkproc() { return pidofproc ${1+"$@"} >/dev/null 2>&1; }
elif test -e /etc/init.d/functions; then
# RHAT
. /etc/init.d/functions
echo_rc()
{
#echo -n " [${_SMSG[${_RC_RV}]}] "
if test ${_RC_RV} = 0; then
success " [${_SMSG[${_RC_RV}]}] "
else
failure " [${_SMSG[${_RC_RV}]}] "
fi
}
checkproc() { return status ${1+"$@"}; }
start_daemon() { return daemon ${1+"$@"}; }
else
# emulate it
echo_rc() { echo " [${_SMSG[${_RC_RV}]}] "; }
fi
rc_reset() { _RC_RV=0; }
rc_failed()
{
if test -z "$1"; then
_RC_RV=1;
elif test "$1" != "0"; then
_RC_RV=$1;
fi
return ${_RC_RV}
}
rc_check()
{
return rc_failed $?
}
rc_status()
{
rc_failed $?
if test "$1" = "-r"; then _RC_RV=0; shift; fi
if test "$1" = "-s"; then rc_failed 5; echo_rc; rc_failed 3; shift; fi
if test "$1" = "-u"; then rc_failed ${_RC_UNUSED}; echo_rc; rc_failed
3; shift; fi
if test "$1" = "-v"; then echo_rc; shift; fi
if test "$1" = "-r"; then _RC_RV=0; shift; fi
return ${_RC_RV}
}
rc_exit() { exit ${_RC_RV}; }
rc_active()
{
#if test -z "$RUNLEVEL"; then read RUNLEVEL REST < <(/sbin/runlevel);
fi
if test -e /etc/init.d/S[0-9][0-9]${1}; then return 0; fi
return 1
}
fi
# Reset status of this service
rc_reset
# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - user had insufficient privileges
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
# 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.
case "$1" in
start)
echo -n "Starting cherokee "
## Start daemon with startproc(8). If this fails
## the return value is set appropriately by startproc.
start_daemon $CHEROKEE_BIN -b
# Remember status and be verbose
rc_status -v
;;
stop)
echo -n "Shutting down cherokee "
## Stop daemon with killproc(8) and if this fails
## killproc sets the return value according to LSB.
killproc -TERM $CHEROKEE_BIN
# Remember status and be verbose
rc_status -v
;;
try-restart|condrestart)
## Do a restart only if the service was active before.
## Note: try-restart is now part of LSB (as of 1.9).
## RH has a similar command named condrestart.
if test "$1" = "condrestart"; then
echo "${attn} Use try-restart ${done}(LSB)${attn} rather than
condrestart ${warn}(RH)${norm}"
fi
$0 status
if test $? = 0; then
$0 restart
else
rc_reset # Not running is not a failure.
fi
# Remember status and be quiet
rc_status
;;
restart)
## Stop the service and regardless of whether it was
## running or not, start it again.
$0 stop
$0 start
# Remember status and be quiet
rc_status
;;
force-reload)
## Signal the daemon to reload its config. Most daemons
## do this on signal 1 (SIGHUP).
## If it does not support it, restart the service if it
## is running.
echo -n "Reload service cherokee "
## if it supports it:
killproc -HUP $CHEROKEE_BIN
#touch /var/run/cherokee.pid
rc_status -v
## Otherwise:
#$0 try-restart
#rc_status
;;
reload)
## Like force-reload, but if daemon does not support
## signaling, do nothing (!)
# If it supports signaling:
echo -n "Reload service cherokee "
killproc -HUP $CHEROKEE_BIN
#touch /var/run/cherokee.pid
rc_status -v
## Otherwise if it does not support reload:
#rc_failed 3
#rc_status -v
;;
status)
echo -n "Checking for service cherokee "
## Check status with checkproc(8), if process is running
## checkproc will return with exit status 0.
# Return value is slightly different for the status command:
# 0 - service up and running
# 1 - service dead, but /var/run/ pid file exists
# 2 - service dead, but /var/lock/ lock file exists
# 3 - service not running (unused)
# 4 - service status unknown :-(
# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
# NOTE: checkproc returns LSB compliant status values.
checkproc $CHEROKEE_BIN
# NOTE: rc_status knows that we called this init script with
# "status" option and adapts its messages accordingly.
rc_status -v
;;
probe)
## Optional: Probe for the necessity of a reload, print out the
## argument to this init script which is required for a reload.
## Note: probe is not (yet) part of LSB (as of 1.9)
test /etc/cherokee/cherokee.conf -nt /var/run/cherokee.pid && echo
reload
;;
*)
echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|
reload|probe}"
exit 1
;;
esac
rc_exit
And here you are:
[EMAIL PROTECTED] Desktop]$ sh cherokee.init start
Starting cherokee
[EMAIL PROTECTED] ~]# sh /home/manu/cherokee/cherokee.init start
Starting cherokee
[EMAIL PROTECTED] ~]#
[EMAIL PROTECTED] ~]# netstat -putan | grep -i cherokee
tcp 0 0 0.0.0.0:80 0.0.0.0:*
LISTEN 7530/cherokee
[EMAIL PROTECTED] ~]#
Kind regards
--
Manuel Arostegui Ramirez.
Electronic Mail is not secure, may not be read every day, and should not
be used for urgent or sensitive issues.
_______________________________________________
Cherokee mailing list
[email protected]
http://www.0x50.org/cgi-bin/mailman/listinfo/cherokee
