----- Original Message -----
Sent: Monday, June 25, 2001 11:57
PM
Subject: RE: [Chevelle-List] Need
Engine RPM Help
Lon,
My BB and 3.07 gear and tire size runs right at
3000 at 75 and never gets above 190. I prefer to run in the 2400-2600
range when I'm driving 6-10 hours at a time, about 65-70 which is the
speed limit anyway in most states. Enroute to Nashville this year I
took a side trip to KC - about 450 miles and ran it 70-75 all the way.
Next day we left for Nashville - about 600 miles and drove it straight
through less fuel and food stops. Still ran it 70-75 all the
way. From KC to Nashville we were with a couple of other cars and
although we pretty much stayed together, I didn't like driving that long at
3000 plus (they liked to run 80-85 on the highway).
Last year going to Nashville from Lawton (about 800
miles), I drove it in two easy days at 65-70 and had no problems what so
ever. Plan on taking it back to KC in August for the MCR
there.
Dale
I have a question regarding engine RPM. I have
a 350 with Edelbrock Performer RPM's hydraulic lifters,
intake and carb kit with regular flat top pistons I built about a year
ago. The compression is normal for that of a 350 (8.5
to 1?) and it runs just fine on 87 octane. The tranny is a 350
with a 1,800-2,400 stall converter and mild shift kit set at "towing"
stage with no added tranny cooling. My rearend is all new including axles
and posi unit with Richmond 3.36 gears.
**My question is this.** On the interstate at
cruising speed (65 mph) I am running 3,100 RPM's. Is this ok for long
periods of travel say 6-8 hours? It seems somewhere I read that you
want to stay below 3,000 RPM's........
Also, what would be the MAXIMUM RPM's a person would
want to run at for long periods of time?
Thanks for any opinions out there.
