Replies to this message are sent to The Chevelle Mailing List
------------------------------------------------------------
no Dave the th350 behind a 3.8 has what is known as a b.o.p. bell
housing[buick,olds,pontiac]which is different from the chevy bolt
pattern..................
Rob
----- Original Message -----
From: "Dave Henderson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 27, 2001 7:04 PM
Subject: [Chevelle-List] Parts interchanging?
>
> Replies to this message are sent to The Chevelle Mailing List
> ------------------------------------------------------------
>
> Hey guys,
>
> Will a th350 from an 85 Caprice with the 3.8L V6 bolt to my 67 Chevy
> 250 in place of my powerglide?
>
> I have 14" wheels, and I want to swap to the 11" discs from this
> Caprice. I put my wheels on it, and they cleared the caliper by
> about 1/4 inch. Is this enough clearance, and will that change were I
> to swap the spindles etc. to my car?
>
> Is there anything else I should pull from this before I send it to
> the wrecker? My car is largely stock, so I'm open to
> suggestions/experimenting.
>
> Thanks,
> Dave.
> --
> There is a world of difference between having to say something and
> having something to say. - John Dewey.
>
> -----------------------------------------------------
> To Unsubscribe please visit www.chevelles.net/list.html
> To start a new topic, send mail to: [EMAIL PROTECTED]
-----------------------------------------------------
To Unsubscribe please visit www.chevelles.net/list.html
To start a new topic, send mail to: [EMAIL PROTECTED]
