Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
Rocky, Thanks for your reply. Could you tell me what you are using for a throttle cable and hardware. I need some kind of plan. Thanks Bob Also tomorrow I'll be taking my Chevelle to a chassis dyno (weather permitting, i.e. no snow storm ) for a couple base line torque and H.P. pulls and this dyno will also simulate 1/4 mi. runs. It will be interesting as I am going to do it with full exhaust (headers, Dr. Gas X-Pipe, three chamber Flow Masters and 2.5" tails out the back) then open headers. We will see how well the x pipe really works. Then a new custom calibrated carb, curved MSD distributor, and new intake will be installed and back to the dyno and see what gains are made. I'll keep you posted. > Bob, > I can't help you with the bracket,but wanted to let > you know the aftermarket fuel line line with the y > block should bolt up just fine, I bought mine from > Year-One, part number RS415,This is original > replacement for the 396/375 Holley, > I have a 4150 double pumper and it fit perfect from > the fuel pump to the carb,it's 3/8's line from the > pump to the y-block, and 5/16's from block to carb, > cost was $49.95I am very happy with mine. > > Rocky Hill > ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
