Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
I drilled out most of the rubber and when it loosened enuff, i pushed the rest out. Then collapsed the metal collar (if you don't need to reuse it). I had the rear out of the car, froze the bushings overnite and whacked them in. At links.chevelles.net/links there are links to a couple of websites that may help you. Some home made tools to make things easier. Look in the WorkShop area. rick schaefer 72 El Camino http://members.home.net/jimmy4/rick1972elky.html TPI 350-700r4 http://chevelles.com/showroom/ricks%20motor%20-L Team Chevelle # 0038 ACES #0140 On Sun, 03 Mar 2002 09:10:18 -0800 "Rick Morales" <[EMAIL PROTECTED]> writes: > > Replies to this message are sent to The Chevelle Mailing List > ------------------------------------------------------------ > > > > Hey guys i ran into a problem when installing my new bushings. HOw > do you > get the bushings our of the rear axle. And how would you get the > new ones > in. Is there a special tool. > > I have a 68 chevelle with the stock 10 bolt. > > Thank you > Rick > > _________________________________________________________________ > Join the world�s largest e-mail service with MSN Hotmail. > http://www.hotmail.com > > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
