I'd use a portable heater but I probably still couldn't get the temp in my 3
car garage up over 35 degrees.

Craig
(Mountains of Western Maryland)

----- Original Message -----
From: "Mark Weber" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[EMAIL PROTECTED]>
Sent: Wednesday, November 19, 2003 9:50 PM
Subject: RE: [Chevelle-list] Upholstery


> I'm probably going to use a portable heater this winter. Aside from the
> blast of 110 deg air, the whole garage will get into the 80's or 90's so
> everything should soften up.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Wayne
> Sent: Monday, November 17, 2003 8:14 PM
> To: The Chevelle Mailing List
> Subject: Re: [Chevelle-list] Upholstery
>
>
> Another trick is to use a HEAT gun....to work the seat cover over the
> buns...
> BTDT...  I also sat the seat cover in front of a Kero jet ready heater at
a
> distance to make it Soft a pliable....
>
> Wayne
> ACES # 1556
> TC # 186
> ----- Original Message -----
> From: "Mark Weber" <[EMAIL PROTECTED]>
> To: "The Chevelle Mailing List" <[EMAIL PROTECTED]>
> Sent: Sunday, November 16, 2003 8:13 PM
> Subject: RE: [Chevelle-list] Upholstery
>
>
> > One generally accepted practice is to set the seat with the cover
> stretched
> > over out in the driveway in the 95 deg sun for a while to soften 'er up.
> > Then stretch it and hog ring it.
> >
> > I would like to rebuild my seats myself this winter, but I think I will
> wait
> > until next summer to do it since I think the sun will be an excellent
> > stretch agent.
> >
> > Mark
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf Of
> > [EMAIL PROTECTED]
> > Sent: Sunday, November 16, 2003 4:20 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [Chevelle-list] Upholstery
> >
> >
> > Seems like the last time I was at an upholstery shop they had some kind
of
> > steamer rigged with a hose to get up under the vinyl to soften and get a
> > tight,
> > wrinkle free fit.
> > Neal S.
> >
> >
> >
> >
>
>
>


Reply via email to