I built or own home and installed duct work in the ceiling of the 3 car
garage along with a high efficiency furnace sized for the total square feet
of the garage.  Another factor of keeping heat in the garage is insulated
walls/ceiling, having insulated garage doors and good sealing weather
strip.  I am also the guy with the third stall that ramps down to the
basement floor level so the work shop connects to the garage.  The workshop
is heated with the rest of the first floor and it's where I park the
Chevelle during the winter.  Stole the concept from my Dad who has several
antique cars in his basement at all times.  People call it the bat cave.

Krister Meister
Bloomingdale, IL
'66 SS #'s matching




                                                                                       
                                  
                    "crobertson1"                                                      
                                  
                    <[EMAIL PROTECTED]>       To:     "The Chevelle Mailing List" 
<[EMAIL PROTECTED]>    
                    Sent by:                        cc:     (bcc: Krister 
Meister/PBU/Nsk-Corp)                          
                    [EMAIL PROTECTED]       Fax to:                                    
                          
                    velles.net                      Subject:     Re: [Chevelle-list] 
Upholstery                          
                                                                                       
                                  
                                                                                       
                                  
                    11/20/2003 06:42 AM                                                
                                  
                    Please respond to The                                              
                                  
                    Chevelle Mailing List                                              
                                  
                                                                                       
                                  
                                                                                       
                                  




I'd use a portable heater but I probably still couldn't get the temp in my
3
car garage up over 35 degrees.

Craig
(Mountains of Western Maryland)

----- Original Message -----
From: "Mark Weber" <[EMAIL PROTECTED]>
To: "The Chevelle Mailing List" <[EMAIL PROTECTED]>
Sent: Wednesday, November 19, 2003 9:50 PM
Subject: RE: [Chevelle-list] Upholstery


> I'm probably going to use a portable heater this winter. Aside from the
> blast of 110 deg air, the whole garage will get into the 80's or 90's so
> everything should soften up.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Wayne
> Sent: Monday, November 17, 2003 8:14 PM
> To: The Chevelle Mailing List
> Subject: Re: [Chevelle-list] Upholstery
>
>
> Another trick is to use a HEAT gun....to work the seat cover over the
> buns...
> BTDT...  I also sat the seat cover in front of a Kero jet ready heater at
a
> distance to make it Soft a pliable....
>
> Wayne
> ACES # 1556
> TC # 186
> ----- Original Message -----
> From: "Mark Weber" <[EMAIL PROTECTED]>
> To: "The Chevelle Mailing List" <[EMAIL PROTECTED]>
> Sent: Sunday, November 16, 2003 8:13 PM
> Subject: RE: [Chevelle-list] Upholstery
>
>
> > One generally accepted practice is to set the seat with the cover
> stretched
> > over out in the driveway in the 95 deg sun for a while to soften 'er
up.
> > Then stretch it and hog ring it.
> >
> > I would like to rebuild my seats myself this winter, but I think I will
> wait
> > until next summer to do it since I think the sun will be an excellent
> > stretch agent.
> >
> > Mark
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf Of
> > [EMAIL PROTECTED]
> > Sent: Sunday, November 16, 2003 4:20 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: [Chevelle-list] Upholstery
> >
> >
> > Seems like the last time I was at an upholstery shop they had some kind
of
> > steamer rigged with a hose to get up under the vinyl to soften and get
a
> > tight,
> > wrinkle free fit.
> > Neal S.
> >
> >
> >
> >
>
>
>






Reply via email to