Re: [Chevelle-list] motor id

[Danny Wilsher]

Thanks Mike,     The site that Bob Haggard sent had the info. What a nice group of people here!!!!!!! My favorite list of all time!!!! And who was it that said a man and his Chevelle, what a beautiful thing!!!!    ����� ..............  Wilsher Motor Sports ----- Original Message ----- From: Mike Holleman To: The Chevelle Mailing List Sent: Thursday, February 26, 2004 3:54 PM Subject: Re: [Chevelle-list] motor id Danny, The engine number you are showing is telling you that V- was built at the Flint plant,05 is the month of May, 14 should be the day(could the I be a one?) and the YS is the engine code. None of my books show a YS code, but that does not mean anything other than the code was not for a body that I have info for. If someone has that info it will tell you what the engine was, cubes,HP,comp. ratio, carb and trans.Hope this is of some use to you. Mike Holleman  ----- Original Message ----- From: Danny Wilsher To: The Chevelle Mailing List Sent: Thursday, February 26, 2004 4:41 PM Subject: Re: [Chevelle-list] motor id The motor is torn down and on the stand. I will check the crank and see what mortec says it is. I was wondering where I could find the info on what the stamped numbers on the front of the block mean (VO5I4YS). Thanks Jason and Brad!!!!    ����� ..............  Wilsher Motor Sports ----- Original Message ----- From: jason mcentee To: The Chevelle Mailing List Sent: Thursday, February 26, 2004 1:31 PM Subject: Re: [Chevelle-list] motor id Hey man, I had the same problem with my engine. The casting numbers for it was a 283, 302, or 327. I narrowed it down by matching the numbers on the crankshaft which only went to one engine. Unfortunately it was to the 283. Hope that helps( if the motor is apart).