On Thu, 14 Jul 2005 [EMAIL PROTECTED] wrote: > > From: Bob Holtzman <[EMAIL PROTECTED]> > > Subject: RE: [Chevelle-list] RE: Hot start probs > > You could check into this kit for eliminating hot start problems. > http://www.madelectrical.com/catalog/st-1.shtml > > I made my own setup using a starter relay from a mid-70's Chrysler product. > It looks a lot like the relay that used to come with fog light and driving > light kits. > Then Chevy's starter wire just activates the relay and the relay sends power > to the starter solenoid via shorter lengths of decent size wire(10 or 12 ga.) > so solenoid gets full voltage and amperage and operates even when hot. > Probably a Bosch relay, as found on many newer cars would work too. > Most of the problem is old wiring that was borderline in size to begin with.
Thanks for the reply. That was the next thing I was going to try if the larger wire didn't work. -- Bob Holtzman "If at first you do succeed, try not to look astonished."
