Thanks guys- I checked the axles for lettering and found nothing. With my luck, it's probably up top in the hardest spot to find.
I had to let the rear go that I was considering, but I'm sure more will be available down the pike. Jim --- Dale <[EMAIL PROTECTED]> wrote: > Standard axle ratio for a 283/PG 66 would have been > a 3.08 w/o AC or 3.36 > w/AC. Codes to look for on the (probably) passenger > side axle tube would be > "CA", possibly "CE" if it has Positraction, or "CL" > if it came with metallic > rear brakes. A 3.36 would have "CB", "CG" (posi), > or "CP" w/metallic > brakes. > > As Bill mentioned, you can check my site > http://www.chevellestuff.com for > more codes and a bit more info on 64-72 Chevelles. > > Dale > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of J. Brady > Sent: Friday, July 22, 2005 3:32 PM > To: [email protected] > Subject: [Chevelle-list] 66 rear question > > Guys/Gals, > > Im contemplating getting a new rear for my 66, and > wondered if any of you might have a guess as to what > the standard rear was for a car like mine? It was > originally a 283 car w/powerglide. > > If anyone can provide a guess, or tell me how to > identify the rear in the car w/o having to tear it > open, Id really appreciate it. Its currently a > 10-bolt > I know that for sure. > > Regards, > > Jim > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam > protection around > http://mail.yahoo.com > > > > > > ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs
