DR - Do you have any slips for that car? I'm looking at producing the same numbers with deeper gearing. As I look outside to a half-assembled car, covered in snow, I'd like the inspiration! ;-)
Karl Groves Master Certified CIW http://www.karlgroves.com Will Work For Parts: http://chevelle.karlcore.com/detail.php?id=3 > -----Original Message----- > From: D.R. Jones [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 15, 2006 5:55 PM > To: The Chevelle Mailing List > Subject: Re: [Chevelle-list] carburetor suggestion > > I have almost the same motor with a 2004R non-lockup trans (B&M) and > 3.73 posi. I'm running 750 Performer and Performer intake. > Motor dyno at 500HP and 500 torque. Will change intake to > Performer Air Gap soon. > I psersonally like the Performer carbs rather than > Holley's. Course that is just what I like. > > D.R. Jones > > Jimmy C. wrote: > > > I'm am shopping for a carburetor and looking for > suggestions. I have a > > 454 ci that is 60 over , with flat top pistons not quite sure of > > compression. 113cc oval port heads ,it has comp cam with .526 lift > > int. & ex, duration is 230 deg., lobe seperation is 110 deg, stock > > valve train, edelbrock performer 2.0 intake. appreciate all > > suggestions. thank you ,Jimmy .C > > > >
