Re: [Chevelle-list] Spark plug wires

Thu, 25 May 2006 06:06:28 -0700

Ditto. I also bought the MSD p/n 35379 for the big blocks which are 8.5mm spiral wound 50 ohm wires with the bendable ends. They are red with gray boots.
 
As a sidenote about MSD as a company, when I assembled my engine, I took it in to have it dyno'ed. In the process, I lost my coil wire. Not being able to find a suitable replacement at Summit, I called MSD. They sent one out at no charge. Way to go MSD!
 
Here's a picture of my engine with the wires.
 
 
Larry Shouse
 
 
----- Original Message -----
From: Devin
Sent: Thursday, May 25, 2006 12:57 AM
Subject: Re: [Chevelle-list] Spark plug wires

I found that MSD Multi-angle ends worked best with my BB and Hooker headers.  They can each be bent to fit their particular location.
 
Devin
----- Original Message -----
Sent: Wednesday, May 24, 2006 8:33 PM
Subject: [Chevelle-list] Spark plug wires

I've been meaning to ask for a recomendation on wires as well. I have a 69 396SS with Hooker Comp headers and I'm needing to replace the plug wires. Any brands to avoid? 45 degree boots? 135 degree boots?  


-----Original Message-----
From: [EMAIL PROTECTED]
Sent: May 23, 2006 9:05 PM
To: [email protected]
Subject: Re: [Chevelle-list] (no subject)

I bought some of the Taylor 8MM spiral wound wires. Just plain black, with the 45 degree boots. You can get them straight, or 90 degree also. They appear stock, only giveaway is some white writing on them.

Reply via email to