John, simply run the existing cable from starter to the F*** solenoid on the
fire wall, run new cable from bat. to new solenoid. I had to do this on my 406
powered truck. It works great, and if one solenoid or the other goes bad, you
can run off the other until you can replace the bad. Pretty simple job, really,
just make sure you have good ground to new unit on fire wall.
Brian> Date: Sat, 27 Oct 2007 13:55:41 -0700> From: [EMAIL PROTECTED]> To:
[email protected]> Subject: Re: [Chevelle-list] starter & starter
wiring> > Hi Dale,> > Yes it seems to me that you could easily make it yourself
but having a > nice little kit with instructions is handy. Do you still have
the > instructions?> > Thanks,> John> > > Quoting Dale <[EMAIL PROTECTED]>:> >
<snip> One could make their own 'kit' with a simple> > Ford solenoid and some
wiring. Toughest part to 'make' would be the> > connector required on the
starter.> >> > >
_________________________________________________________________
Help yourself to FREE treats served up daily at the Messenger Café. Stop by
today.
http://www.cafemessenger.com/info/info_sweetstuff2.html?ocid=TXT_TAGLM_OctWLtagline
