Some of the chevelles used small rubber blocks in the bottom channel. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tony Sent: Thursday, April 28, 2011 9:03 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Reinstalling rear window moulding
Was the rear window taken out and put back in? If so possibly it isn't sitting out as proud as it used to. Old methods used butyl tape that gave just the right fit. When using the new sealers the installer must make sure he applies the proper size bead to bring the window out to it's correct position. ----- Original Message ----- From: "Darren" <[email protected]> To: "'The Chevelle Mailing List'" <[email protected]> Sent: Wednesday, April 27, 2011 9:20 PM Subject: [Chevelle-list] Reinstalling rear window moulding >I removed all the factory clips and put all new ones on when we cleaned up > the rust in the channel. The new ones aren't as snug as the others but > they > do look to be almost identical. It seems the moulding sits down in the > channel OK but as I work it in some areas pop back out. Anybody > experienced > this before and/or how do I get it seated again? > > Thanks for your comments! > > Darren > > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1209 / Virus Database: 1500/3601 - Release Date: 04/27/11 >
