On Sat, Aug 22, 2020 at 6:46 PM Charles Gierke <[email protected]> wrote: > > On Wednesday my 2 BaoFeng UV 5R radios could download and upload to CHIRP. > > On Friday all I got was the following message: Radio Did Not Respond. > > I tried reloading the latest version of CHIRP, no change. I tried an earlier > version of CHIRP, no change. I reloaded the latest version back, no change. > Visually the radio's red light blinks then the LED display blinks then the > error message shows up on CHIRP. > > > Any suggestions? > > Thanks Chuck KJ7INT >
Hi Chuck, You will get the exact same error message if you don't plug the 2-pin plug into the radio. So make sure that the 2-pin plug is fully inserted into the socket of the radio. Some have had to put a little pressure on the plug during the cloning process. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
