I am trying to setup Ethernet sub internfaces on a 3660. I can create the interface and ping it from the router but when I connect my laptop up to the port and try and ping the same IP I get nothing. I am sure I am missing more. The Google lottery turns up some stuff about bridge groups but it's turning up more sales type documents than how tos.
What I am trying to do is I physically connecting FA0/1 to a Radio that sends a point to point link to a building where I have 3 separate networks. I am coming out of the Radio on the far side into a switch and then out to 3 networks (Which are the 3 sub interfaces) After I get this working I will relace the private IPs with smaller subnets of public IPs. ! interface FastEthernet0/1 ip address 10.100.1.1 255.255.255.0 duplex auto speed auto ! interface FastEthernet0/1.100 encapsulation isl 100 ip address 10.100.100.1 255.255.255.0 no ip redirects ! interface FastEthernet0/1.101 encapsulation isl 101 ip address 10.100.101.1 255.255.255.0 no ip redirects ! interface FastEthernet0/1.102 encapsulation isl 101 ip address 10.100.102.1 255.255.255.0 no ip redirects ! Thanks -Richey _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
