Skeeve, It depends on what you are trying to achieve :-) Bridging between 801.q subint is supported in 12.1T and above, see http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a008008019c.html#wp1015343 If you want to forward only a subset of traffic, look at UDP Broadcast Flooding Rgds Alex
----- Original Message ----- From: "Skeeve Stevens" <[EMAIL PROTECTED]> To: "'Cisco-nsp'" <[email protected]> Sent: Tuesday, June 12, 2007 6:11 PM Subject: [c-nsp] Bridging dot1q on a 7200 >I am full of questions tonight - that's what happens when you are working >on > a dozen things at once. > > I am looking to bridge two layer 2 dot1q interfaces coming in on 2 > different > Ethernet interfaces on a 7200(g1/300/400) > > Is what I am looking at a BVI? > > .Skeeve > > -- > Skeeve Stevens, RHCE > [EMAIL PROTECTED] / www.skeeve.org > Cell +61 (0)414 753 383 / skype://skeeve > > eintellego - [EMAIL PROTECTED] - www.eintellego.net > -- > I'm a groove licked love child king of the verse > Si vis pacem, para bellum > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
