Is the port configured with anything out of the ordinary, broadcast storm suppression, policing, etc? Anything in the logs showing up involving layer 2 or 3 stuff - unresolved MAC addresses, ARP? Backplane issue maybe on that card or CPU on the sup? Did it just start doing this? If so, what changed?
Chuck -----Original Message----- From: Ras [mailto:[EMAIL PROTECTED] Sent: Monday, June 25, 2007 9:02 AM To: Church, Charles Cc: c-nsp Subject: Re: [c-nsp] FE switchport output drops On 25/06/07, Church, Charles <[EMAIL PROTECTED]> wrote: > Do the speed and duplex match on both sides? Does the Juniper > interface give you any clue what's going on? Any output errors on the > Cisco side? Link is set to 100/Full on both sides. There are no errors at all on either side and the Juniper isn't reporting anything untoward. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
