There is actually no need to swap chassis. This error message indicates that the SP-CPU inband port (the internal 1 Gig connection) FIFO pointers were not moving for certain amount of time possibly indicating something wrong between the CPU and it's inband connection. All this is internal to the Supervisor.
If the errors are persistant, the active sup might eventually reset or switchover (in case there is standby). As part of the upgrade process, the transient condition probably got cleared. sukumar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John I Sent: Wednesday, October 10, 2007 1:33 PM To: 'Kevin Graham'; [email protected] Subject: Re: [c-nsp] C6500 C6KERRDETECT-SP-2-FIFOCRITLEVEL Hi Kevin, > Try bumping up to a later 12.1E. > > This had cropped up twice on the same switch for me, the first time > TAC recommendation was to reseat the module, the second time it was to > swap the chassis. Prior to having time to schedule a fully chassis > swap, bumped up to 12.1(27b)E1 from 12.1(26)E1 and errors haven't > cropped up since. > Additionally, despite the scary sounding message, I don't think we > ever saw any evidence of something actually broken as a result... I too had the suggestion of reseating the module on the cisco forum. I agree with you in that the machine still seems to be processing packets fine and no evidence of problems. I will give the newer IOS a try and see if that helps as it did for you. Thanks for your suggestion. Regards, John _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
