Hi sukumar, Thanks for your reply.
> There is actually no need to swap chassis. > > This error message indicates that the SP-CPU inband port (the > internal 1 Gig connection) FIFO pointers were not moving for > certain amount of time possibly indicating something wrong > between the CPU and it's inband connection. All this is > internal to the Supervisor. > I've only started receiving this message after upgrading the supervisor memory on the module, otherwise, it has been fine for months. Could I have not reseated the MSFC properly onto the SUP? Could it be the memory? Could I have bumped something else? Are there any commands I can execute to see these fifo pointers you mention? > If the errors are persistant, the active sup might eventually > reset or switchover (in case there is standby). As part of > the upgrade process, the transient condition probably got cleared. > The errors have been going for a while now, however, the unit continues to switch/route packets without problem. What would you recommend I do? (I will be trying what's been recommended already such as reseat module & upgrade IOS) Thanks, John _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
