On Wed, 2007-10-24 at 10:10 +0100, Ian MacKinnon wrote: > Hi All, > > I am trying to create some vlans on a 6500 Sup32 running 12.2SXH > > When I try and create vlan 1010 and give it a name I get an error. > > eg > conf t > vlan 1010 > name myname > > Gives > %Failed to commit extended VLAN(s) changes. > > and the log shows > Oct 24 09:04:21.264: %PM-SP-4-EXT_VLAN_INUSE: VLAN 1010 currently in use > by online diag vlan4 > Oct 24 09:04:21.264: %SW_VLAN-SP-4-VLAN_CREATE_FAIL: Failed to create > VLANs 1010: VLAN(s) not available in Port Manager > > > a show vlan internal usage shows > VLAN Usage > ---- -------------------- > 1006 online diag vlan0 > 1007 online diag vlan1 > 1008 online diag vlan2 > 1009 online diag vlan3 > 1010 online diag vlan4 > 1011 online diag vlan5 > 1012 PM vlan process (trunk tagging) > 1013 Control Plane Protection > 1014 L3 multicast partial shortcuts for VPN 0 > 1015 Egress internal vlan > 1016 Multicast VPN 0 QOS vlan > 1017 IPv6 Multicast Egress multicast > > > I have > vlan internal allocation policy ascending > > > I am not using the end vlan numbers, would changing this to descending > fix this, although that requries a reboot.
Yes > > Any other options? No _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
