> I just recently installed a new 7206VXR/NPE-G2 router, and looking at > the logging output I am seeing the following: > > Oct 23 11:27:51.705 EDT: %SYS-4-CHUNKMALLOCFAIL: Could not allocate > chunks for > CEF: arp throt > Total free: 0, Total inuse: 500, Cause : Not a dynamic chunk > -Process= "<interrupt level>", ipl= 1, pid= 77, -Traceback= 0x13D5688 > 0x20974 0x20428 0x172B074 0x8BB14 0x686EFC 0x68AAD0 0x682A84 0x66D44C > 0x66C328 > 0x671D50 0x66DA90 0x66C3E4 0x19DDCB4 0x19DDA3C 0x19DB0EC
My completely non-expert opinion (and most likely wrong) on this is that it appears as if your router is running out of memory. Malloc failures generally occur when a router attempts to grab a chunk of memory for some purpose and it cannot allocate the requested amount. Are you running BGP and CEF on this? If so, what does your free memory look like? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
